Insignia NS-HTTCFB8 - User Manual

Questions and Answers:

B
bgarciaAug 5, 2025
How to make my Insignia NS-HTTCFB8 warmer?
- E
  Eric WoodsAug 5, 2025
  If your Insignia Electric Heater isn't warming the room enough, here are a few things to check: * **Room Size/Heat Loss:** The room may be too large, or there might be an open window. Consider using the main heat source, adding more portable heaters, or closing the window. * **Temperature Setting:** The temperature setting might be too low. Try increasing it. * **Power Setting:** The power setting could be set too low. Select a higher power setting for more heat.
L
lkeyAug 10, 2025
What to do if Insignia Electric Heater fails to operate?
- H
  hopkinsdavidAug 11, 2025
  What to do if your Insignia Electric Heater fails to operate? * **Check the power:** Ensure that the heater is correctly plugged into a functioning electrical outlet. * **Temperature settings:** Make sure the set temperature is higher than the current room temperature. * **Overheating protection:** If a safety protection device has been activated, place the heater in an upright position, check for and remove any obstructions, unplug the heater and allow it to cool down for at least 10 minutes, then plug it back in and restart it.
B
Brandon PhillipsAug 16, 2025
Why Insignia NS-HTTCFB8 keeps turning off?
- L
  Lori OrtizAug 16, 2025
  If your Insignia Electric Heater keeps turning off, it could be due to a few reasons: * **Temperature regulation:** It might be reaching the set temperature. This is normal; it will turn back on when the room cools. If the temperature isn't to your liking, adjust the temperature control. * **Overheating:** A safety device may have been triggered. Turn the heater off, unplug it, ensure it's upright and free of obstructions, wait 10 minutes, then plug it back in and restart. * **Power interruption:** Check that the heater is plugged into a working outlet.
B
bradleyvincentAug 22, 2025
Why is Insignia Electric Heater not producing enough heat?
- W
  weaveralyssaAug 23, 2025
  If your Insignia Electric Heater isn't producing enough heat, it might be because: * **Room size:** The room may be too large for the heater, or a window might be open, causing heat loss. Consider using your main heat source, adding more heaters, or closing the window. * **Temperature settings:** The temperature setting might be too low. Increase the set temperature. * **Power levels:** The power level could be set too low. Try selecting a higher power setting.
T
Terri SanchezOct 28, 2025
Why does my Insignia Electric Heater shut off unexpectedly?
- C
  Christina Castro MDOct 28, 2025
  If your Insignia Electric Heater shuts off unexpectedly, there might be a few reasons: * **No power:** Ensure the heater is properly plugged into a working electrical outlet. * **Temperature setting:** The set temperature might be lower than the current room temperature. Adjust the temperature to a higher setting. * **Safety Feature:** A safety device may have been activated due to overheating. To resolve this: 1. Place the heater upright. 2. Check for obstructions and remove them after turning off and unplugging the heater. 3. Wait 10 minutes for the heater to cool, then plug it back in and restart it. * **Normal Operation:** The heater might be reaching the set temperature and turning off, which is normal. It will restart when the room temperature drops below th...

Insignia NS-HTTCFB8 Specifications

General

Brand	Insignia
Model	NS-HTTCFB8
Type	Electric Heater
Heater Type	Ceramic
Heating Power	1500 Watts
Voltage	120 Volts
Heating Method	Ceramic heating element
Number of Heat Settings	2
Oscillation	Yes
Safety Features	Overheat protection
Tip-Over Protection	Yes
Remote Control	Yes
Heat Settings	High, Low
Thermostat	Adjustable Thermostat