5
Ice Maker
www.insigniaproducts.com
Tools and materials needed
You’ll also need:
• A freezer shelf to hold the ice storage bin. If your model does not have one,
contact your dealer to order one.
• Access to a household cold water line with water pressure between 20 and
120 psi.
The water line kit (including copper tubing and shut off valve) are available in a kit
(#5303917950) from your local hardware or plumbing supply store.
Installing the ice maker
Your Insignia refrigerator comes set up for ice maker installation.
Installing the ice maker in a top mount freezer
1 Unplug the refrigerator from the wall outlet.
2 Remove the freezer shelf and ice tray rack from the freezer.
CAUTION: To eliminate the danger of electric shock during installation, you
must first unplug the refrigerator.
Putty knife
Needle nose pliers or
nut driver
Adjustable wrench
1/4” OD copper supply
line with compression
nuts and ferrules
Knife
Phillips
screwdriver
Flat blade
screwdriver
Shut off valve (non
self piercing)
Water line kit
#5303917950
Electric drill with a
1/4” drill bit
To Next Page
Loading...
