23
Insignia 32" LCD TV/Blu-ray DVD Combo, 1080p
www.insigniaproducts.com
Changing channel settings
Selecting the TV signal source
To select the TV signal source:
1 Press TV to select TV mode.
2 Press TV MENU. The Main Menu opens.
3 Press or to select Channel, then press or
ENTER. The Channel menu opens.
4 Press or to select Auto Ch Memory, then
press or ENTER. The Auto Ch Memory menu
opens.
5 Press or to select Signal Type, then press
or to select Air (antenna) or Cable (cable
TV).
6 Press TV MENU to return to the previous menu,
or press EXIT to close the menu.
Automatically scanning for channels
To automatically scan for channels:
1 Make sure that you have selected the TV signal
source. For instructions, see “Selecting the TV
signal source” on page 23.
2 Press TV to select TV mode.
3 Press TV MENU. The Main Menu opens.
4 Press or to select Channel, then press or
ENTER. The Channel menu opens.
5 Press or to select Auto Ch Memory, then
press or ENTER. The Auto Ch Memory menu
opens.
6 Press or to select Automatic Search, then
press or ENTER.
Note
Unless otherwise noted, all tasks in this section are
based on using the remote control.
Channel
Add/Delete
DTV Signal
Auto Ch Memory
Ch Label
Channel
Add/Delete
DTV Signal
Auto Ch Memory
Ch Label
Programming Now
To Next Page
Loading...
