10
Insignia NS-LTDVD19-09CA 19” LCD TV/DVD Combo
www.insignia-products.com
Setting up your TV
Connecting an antenna, cable TV, or
satellite TV
To connect an external antenna, cable TV, or
satellite TV:
1 Plug the antenna cable (2) from an antenna,
cable TV, or satellite receiver (3) to the RF
INPUT jack on your TV.
2 Turn on your TV.
3 Press INPUT, then press / to select TV.
Connecting a standard video device
To connect a standard video device to the
AV1 INPUT jacks:
1 Plug an RCA video cable (2) into a standard
video source (7) and into the VIDEO1 jack on
the back of your TV.
2 Plug the RCA audio cables (4) into the video
device's audio output jack and into the lower
AUDIO L and AUDIO R jacks on the back of
your TV.
3 Turn on your TV.
4 Press INPUT, then press / to select AV1.
To connect a standard video device to the
AV2 INPUT jacks:
1 Plug an RCA video cable (5) into a standard
video source (7) and into the VIDEO2 jack on
the back of your TV.
2 Plug the RCA audio cables (6) into the video
device's audio output jack and into the lower
AUDIO L and AUDIO R jacks on the back of
your TV.
3 Turn on your TV.
4 Press INPUT, then press / to select AV2.
To connect a standard S-Video device to AV1
INPUT jacks:
1 Plug an S-Video cable (3) into the S-Video
out jack on an S-Video device (7) and into the
S-VIDEO jack on the back of your TV.
1
AC INPUT
~ 100-240V 50/60Hz
CPB CPR
L
L
FOR
ONLY
2
3
RF INPUT
Note
Your TV supports multiple video source inputs. For
temporary or easy-access video connections, use
the rear jacks (AV2). For more permanent
connections, use the rear jacks (AV1).
1
AC INPUT
~ 100-240V 50/60Hz
CPB CPR
L
L
FOR
ONLY
5
4
7
2
6
3
RF INPUT
08-1154 NS-LTDVD19-09CA - ENG.fm Page 10 Monday, April 28, 2008 10:03 AM
To Next Page
Loading...
