EasyManua.ls Logo

Insignia NS-MW09BK0 - To Use a Memorized Procedure; Using Multi-Stage Cooking; Using the Energy Saving Mode; Checking the Time and Power Level While Cooking

Insignia NS-MW09BK0
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
15
.9 Cu. Ft. Microwave Oven
www.insigniaproducts.com
To use a memorized procedure:
1 Put the item to be cooked into your microwave and close the door.
2 Press 0/MEMORY repeatedly to cycle through memory 1, 2, or 3. The display shows
“1”, “2, or “3. Stop when you get to the memorized procedure you want to use.
3 Press START/+30 SEC. to use the procedure.
Using multi-stage cooking
Up to two stages can be used to cook your food. For example, you can defrost a meal,
then cook it.
In this example, the food will be cooked with 80% power for five minutes, then 60%
power for 10 minutes.
1 Put the item to be cooked into your microwave and close the door.
2 Press Time Cook, then press 5, 0, and 0 to set the cooking time to five minutes.
3 Press Power, then press 8 to set the power level for 80% power.
4 Press Time Cook, then press 1, 0, 0, and 0 to set the second cooking time to10
minutes.
5 Press Power, then press 6 to set the second power level to 60% power.
6 Press START/ +30 SEC. to begin cooking.
Using the energy saving mode
Energy saving mode turns off the LED display to save power.
In standby mode, press the “STOP/Cancel once (for less than 3 seconds to avoid
starting the child lock function), then release.
OR
In child-lock mode, press the “STOP/Cancel once (for less than 3 seconds), then
release.
Checking the time and power level while cooking
To check the time while cooking a meal, press Clock. The display shows the current
time for three seconds, then returns to the cooking time remaining.
To check the power level while cooking a meal, press Power. The display shows the
power level being used for three seconds, then returns to the cooking time
remaining.
Using the child-lock
To lock your microwave — Press and hold STOP/Cancel for three seconds. Your
microwave sounds a long beep and the display shows , indicating that the
lock is active.
To unlock your microwave — When your microwave is locked, press and hold
STOP/CANCEL for three seconds. Your microwave sounds a long beep, indicating
that lock is released.
Note: Auto cooking cannot be used with multi-stage cooking.
Note: Energy saving mode only works if the door is closed.

Related product manuals