Insignia NS-RMT415 User Manual

5
WATCH TV MODE
While watching TV in STB and STREAM mode,
you can:
• Use your remote’s volume and input buttons to
control the TV. The rest of the buttons control the
device you’ve added to STB or STREAM mode.
• Press
(power) once to turn your set-top box
on or o .
OR
• Press and hold
(power) for two seconds to
turn both your set-top box and your TV on or o .
To turn o watch TV mode:
1 Press and hold SETUP until your remote’s LED
blinks twice.
2 Press STB or STREAM twice. The LED blinks
four times. Watch TV mode is turned o and
your remote will not control your TV.
To turn on watch TV mode after turning
it o :
1 Press and hold SETUP until your remote’s LED
blinks twice.
2 Press STB or STREAM twice. The LED blinks
twice. Watch TV mode is turned back on and
your remote controls your TV again.
LOCKING AND UNLOCKING VOLUME
CONTROLS
To lock the volume of all four modes to one
device, turn o watch TV mode. See “Watch TV
mode” for instructions.
Locking volume controls to one device
1 Press and hold SETUP until your remote’s LED
blinks twice.
2 Press 9, 9, 3.
3 Press the mode button for the type of device
you want to set up (TV, DVD, STB, STREAM).
The LED blinks twice to con rm.
Two blinks = Success
One long blink = Failure

Insignia NS-RMT415 Specifications

General

Brand	Insignia
Model	NS-RMT415
Category	Remote Control
Language	English