www.insigniaproducts.com
11
NS-RNG24SS9
Installing the anti-tip device
1 Adjust the range feet to the correct height. Make sure that the range is level. See Adjusting the height and leveling the
range on page 11.
2 Position the rear brackets on the floor with the notches on the brackets facing the front of the range, then screw the
brackets to the floor using four of the provided screws per bracket.
WARNING:
• All ranges can tip and injure people. Install the anti-tip device that came with the range.
• If you pull the range away from the wall for cleaning, service, or any other reason, make sure that the anti-tip device is
correctly re-engaged when you push the range back against the wall. In the event of abnormal usage (such as a
person standing, sitting, or leaning on an open door), failure to take this precaution can result in tipping of the range.
Personal injury might result from spilled hot liquids or from the range itself.
20.7" (52.5 cm)
2.4" (6 cm) 18.3" (46.5 cm) 2.4" (6 cm)
4"
(10.1 cm)
To Next Page
Loading...
Need help?
General
