27
www.insigniaproducts.com
10-Cycle Electric and Gas Dryers
INSTALLATION INSTRUCTIONS
Reversing the dryer door
Step 1: Remove the dryer door
1 Make sure that the power cord is unplugged.
2 While supporting the door, remove the four hinge screws on the body of the
dryer, then lift the door to remove it.
3 Step 2: Remove the door cover
4 Place your dryer door on a blanket or other soft surface to prevent scratches.
5 Remove the two screws securing the door latch.
CAUTION: Be careful not to drop the door when removing the screws.
To Next Page
Loading...
