10
www.insigniaproducts.com
7 Use a Phillips screwdriver to remove the door stopper screws, then move the
door stopper and axle sleeve to the other side of the door and attach with the
screws you just removed.
8 Use a Phillips screwdriver to remove the hinge bolts, then remove the lower
hinge and the leveling feet.
9 Attach the lower hinge and leveling feet to the opposite sides of your cooler.
Door stopper
Axle sleeve
Door stopper screws
Hinge bolts
Lower hinge and
leveling foot
Leveling foot
Leveling foot
Lower hinge and
leveling foot
Hinge bolts
To Next Page
Loading...
Need help?
General
