6
www.insigniaproducts.com
Control and display panel
Setting up your cooler
Before using your cooler
• Remove the exterior and interior packaging.
• Let your cooler stand upright for approximately half an hour before
connecting it to power. This reduces the possibility of a malfunction in the
cooling system from incorrect handling during transportation.
• Clean the interior surface with a damp, warm cloth.
BUTTON FUNCTION
Press and hold for three seconds to turn on or turn off your cooler.
Press to turn the interior light on or off.
Press to increase the temperature by one degree.
Press to decrease the temperature by one degree.
Press and hold both buttons at the same time for three seconds to turn
on “Quick Cool”.
Press and hold both buttons at the same time for three seconds to switch
between Fahrenheit and Celsius.
Notes:
• Touch the control panel lightly when pressing the buttons.
• To avoid scratching the control panel, do not touch it with sharp objects.
LED Display
Power on/Standby
Temperature +/-
Light
To Next Page
Loading...
Need help?
General
