9
29-Bottle Wine Cooler
www.insigniaproducts.com
Reversing the door
You need a 10 mm socket wrench and a Phillips screwdriver. Have someone
available to assist you in the process. Make sure that you keep all of the parts you
remove to reuse them later.
1 Make sure that your cooler is unplugged and empty.
2 Adjust the leveling feet to their highest positions.
3 Use a blade to remove the rivets.
4 Use a blade to remove the hinge cover, then use a Phillips screwdriver to
remove the hinge bolts.
5 Remove the upper hinge.
6 Remove the door from your cooler.
CAUTION: Do not lay your cooler completely flat as that could damage the coolant
system.
Axle sleeve
Hinge cover
Upper hinge
Hinge bolts
Axle sleeve
Rivets
To Next Page
Loading...
Need help?
General
