24
NS-32D311NA17
www.insigniaproducts.com
Analog audio
1 Make sure that your TV’s power cord is unplugged and the analog speaker system or soundbar is turned off.
2 Connect an audio cable (not provided) to the /AUDIOOUT jack on your TV and to the AUDIO IN jacks on the
analog speaker system or soundbar.
3 Plug your TV’s power cord into a power outlet, then turn on your TV.
4 Turn on the analog speaker system or soundbar, then set it to the correct source. For more information, see the
documentation that came with the analog speaker system or soundbar.
5 On your TV, set the Headphone / Audio Out option on the Audio menu to Headphones / Audio Out Variable or
Audio Out Fixed. See the Headphone / Audio Out option in Adjusting sound settings on page 40.
Note
When you connect an analog system or soundbar to the /AUDIOOUT
jack, the TV speakers are muted.
Audio cable
Analog speaker system
Side of TV
Audio cable
connector
/AUDIOOUT
jack
On your TV
Soundbar
To Next Page
Loading...
