InSinkErator Water Dispenser

Need help?

Do you have a question about the InSinkErator Water Dispenser and is the answer not in the manual?

Summary

Instant Hot Water Dispenser Filter System

Installing the In-Sink-Erator Filter System

Mount the Head & Filter Bracket

Install the head and bracket assembly, marking mounting holes and attaching the bracket securely.

Connect Filter into Filter Bracket

Inspect and insert the filter cartridge into the head & bracket assembly, aligning marks and locking.

Make Plumbing Connections

Route tubing, cut to length, and connect to fixtures using quick-connect fittings and a Y-divider.

Connect to Cold Water Supply Line

Connect the filter inlet tube to the cold water supply line using compression fittings.

Test the Water Connection

Check the installed connections for watertightness and adjust fittings if leaks are present.

Filter Specifications

Filter Replacement Recommendations

Other Products Available