Inspire BL1 User Manual

STEP 16
Attach Left and Right Shrouds (#38L & #38R) by first slipping the top of each Shroud onto the
horns of the upper shroud mount (#5), as shown above. Make sure seams are to the inside.
Next, slide rods (#4) into the bottom of each shroud and attach to frame using:
Four M6*12 Button Head Screws
Note: Be sure to pull the shrouds down taut before tightening the four screws.
Page 19 12/11

Inspire BL1 Specifications

General

Brand	Inspire
Model	BL1
Category	Home Gym
Language	English