18 English Inspire Sleep Remote
Audio Tones
When audio tones are turned on, the sleep remote beeps
when a change to the therapy settings is successfully
completed.
Audio tone: Means:
Two beeps with
the second
beep at a higher
tone than the
first
• Your change was successful.
Three rapid
beeps
• Your change was not successful, because the sleep
remote was unable to communicate with your
generator. Try the change again. (For instructions on
positioning your sleep remote, refer to page 20.)
• You tried to increase the stimulation strength outside
the range set by your doctor, and you have reached
the upper limit. (For instructions on increasing your
stimulation strength, refer to page 28.)
• You tried to decrease the stimulation strength outside
the range set by your doctor, and you have reached
the lower limit. (For instructions on decreasing your
stimulation strength, refer to page 29.)
Six rapid beeps
• Communication with your generator was interrupted
by electromagnetic interference. Move away from
potential sources of interference, and try again.
To Next Page
Loading...
