Inspire Sleep Remote English 29
To increase stimulation strength:
1. Press the Increase button ( ).
Note: If the sleep remote beeps rapidly three times, and
the upper limit light ( ) on the back of the remote is on,
you have reached the upper limit.
2. Position the sleep remote directly over your generator
and against your body with the buttons facing away from
your body (Figure 15).
3. Wait until the sleep remote produces a tone or 10
seconds pass.
4. To test the new stimulation strength:
a.Turn therapy off.
b.Turn therapy on. You will receive one short stimulation
immediately when therapy is turned on.
Decreasing Stimulation Strength
The sleep remote allows you to decrease the
stimulation strength within a range set by your doctor.
If stimulation feels too strong, you may want to
decrease ( ) the stimulation strength. Stimulation
strength can be decreased with therapy on or off.
The stimulation strength gauge on the back of the sleep
remote indicates the current stimulation strength. If only one
bar on the gauge is lit, then stimulation strength is at the
lowest allowed setting. (For information on the stimulation
strength gauge, refer to page 14.)
To Next Page
Loading...
Need help?
General
