Inspire SLEEP REMOTE User Manual

30 English Inspire Sleep Remote
Contact your doctor if you can’t achieve the desired
stimulation strength.
To test the current stimulation strength:
1. Turn therapy off by pressing the Therapy Off button ( )
and positioning the sleep remote over your generator.
2. Wait until the sleep remote produces a tone or 10
seconds pass.
3. Turn therapy on by pressing the Therapy On button ( )
and positioning the sleep remote over your generator.
4. Wait until the sleep remote produces a tone or 10
seconds pass.
5. You will receive one short stimulation immediately when
therapy is turned on.
To decrease stimulation strength:
1. Press the Decrease button ( ) to adjust your
stimulation strength.
Note: If the sleep remote beeps rapidly three times, and
only one bar on the stimulation strength gauge is on, you
have reached the lower limit.
2. Position the sleep remote directly over your generator
and against your body with the buttons facing away from
your body (Figure 15).
3. Wait until the sleep remote produces a tone or 10
seconds pass.
4. To test the new stimulation strength:
a.Turn therapy off.

Inspire SLEEP REMOTE Specifications

General

Brand	Inspire
Model	SLEEP REMOTE
Category	Medical Equipment
Language	English