Inspire SLEEP REMOTE User Manual

48 English Inspire Sleep Remote
Your sleep
remote lights do
not turn on when
it is gently
shaken.
Your sleep remote
may have been
excessively
bounced during
the previous 30
minutes and has
temporarily
disabled motion
sensing to save
battery life.
• Press the Therapy Off button
( ) and wait 10 seconds. If
the remote lights do not turn
on, replace the remote
batteries (refer to page 35).
Your sleep
remote falls into
water.
1. Immediately remove the
sleep remote from the water.
2. Dry the sleep remote with a
towel.
3. Remove the batteries and dry
the battery compartment if
needed.
4. Allow the battery
compartment to air dry at
room temperature for at least
24 hours.
5. Insert new batteries.
Your sleep
remote falls off a
cabinet or table.
• The sleep remote is designed
to withstand a short drop and
still operate normally, even if
the case is chipped or
otherwise damaged.
If this happens: Possible
causes:
Try these steps:

Inspire SLEEP REMOTE Specifications

General

Brand	Inspire
Model	SLEEP REMOTE
Category	Medical Equipment
Language	English