Assembly Steps:
❶
Align the holes on the side of the lens to the points on the Core, and press
the two together until they firmly connect.
❷
Align the already assembled Core and lens to the connecting points of the
Battery Base. Then press the two parts together until they firmly connect.
* Pro Tip:
1) Avoid disassembling or storing
a disassembled ONE RS in high
humidity environments, as camera
could be damaged.
2) To remove the Battery Base, push
the battery buckle to the right, then
pull the Battery Base off.
Battery
Buckle
❶
Ensure the battery has been assembled properly. Please connect the
included charge cable to ONE RS in case of low or depleted battery.
Note: Please use a 5V/2A power adapter to charge your ONE RS. You can also
use the official Insta360 Fast Charge Hub (sold separately).
3 Before You Start
EN
3
To Next Page
Loading...
