Instant Pot VIVA Series User Manual (English)

Questions and Answers:

M
Matthew RhodesAug 13, 2025
Why is steam leaking from the side of my Instant Pot VIVA lid?
- K
  Katherine KimAug 14, 2025
  If steam is leaking from the side of the Instant Pot Electric Pressure Cooker lid, there could be several reasons. First, ensure the sealing ring is installed. If it is, check for damage or improper installation and replace the sealing ring if needed. Food debris attached to the sealing ring can also cause leaks, so remove the sealing ring and clean it thoroughly. Make sure the lid is closed properly by opening and then closing it again. If the sealing ring rack is warped or off-center, remove the sealing ring from the lid and check the rack for bends or warps. Finally, the inner pot rim may be misshapen, so check for any deformation.
B
Brian ClarkAug 17, 2025
What to do if I have difficulty opening the lid of my Instant Pot VIVA Electric Pressure Cooker?
- Y
  yblairAug 17, 2025
  If you're having difficulty opening the lid of your Instant Pot Electric Pressure Cooker, it's likely due to pressure inside the cooker. Release the pressure according to your recipe and only attempt to open the lid after the float valve has dropped down. Alternatively, the float valve might be stuck in the popped-up position because of food debris or residue. Ensure all steam is released by quick releasing the pressure, then gently press the float valve with a long utensil. Open the lid cautiously and thoroughly clean the float valve, surrounding area, and lid before the next use.
S
Stephanie WhiteheadAug 21, 2025
Why is it difficult to close the lid of my Instant Pot Electric Pressure Cooker?
- C
  Courtney AliAug 21, 2025
  If you're having difficulty closing the lid on your Instant Pot Electric Pressure Cooker, it might be due to a few reasons. First, make sure the sealing ring is properly installed and snug behind the sealing ring rack. If the float valve is in the popped-up position, gently press it downward with a long utensil. If the contents in the cooker are still hot, press the quick release button down until it clicks into the Vent position, then lower the lid onto the cooker base slowly, allowing heat to dissipate.
F
Frank PatelAug 25, 2025
How to remove inner pot stuck to lid on Instant Pot Electric Pressure Cooker?
- W
  Wendy SmithAug 26, 2025
  If the Instant Pot Electric Pressure Cooker inner pot is stuck to the lid when you open the cooker, it is because the cooling of the inner pot may create suction, causing the inner pot to adhere to the lid. To release the vacuum, press the quick release button down until it clicks into the Vent position.
B
Brandy GrantAug 28, 2025
What to do if the display remains blank on my Instant Pot Electric Pressure Cooker?
- J
  Joseph HollandAug 28, 2025
  If the display remains blank after connecting the power cord to your Instant Pot Electric Pressure Cooker, inspect the power cord for damage. Also, check the outlet to ensure it is powered.
J
James CruzSep 1, 2025
Why is steam gushing from the steam release valve of my Instant Pot VIVA Electric Pressure Cooker?
- K
  Kim HahnSep 1, 2025
  If steam gushes from the steam release valve when the quick release button is in the Seal position on your Instant Pot Electric Pressure Cooker, it could be due to a few reasons. Ensure you have added enough thin, water-based liquid to the inner pot (6 Qt: 1 1/2 cups or 8 Qt: 2 cups). Also, make sure the steam release valve is seated properly by flicking the quick release button to ensure it is in the Seal position.
C
Carol VegaSep 5, 2025
Why is my Instant Pot VIVA hissing steam during the cook cycle?
- N
  Nathan HamptonSep 5, 2025
  If you observe minor steam leaking or hissing from the steam release valve during the cook cycle of your Instant Pot Electric Pressure Cooker, first ensure that the quick release button is in the Seal position. If it is already in the seal position, this is normal, as the cooker is regulating excess pressure, and no action is required.
D
David FisherSep 9, 2025
Why doesn't the float valve rise on my Instant Pot Electric Pressure Cooker?
- L
  Luis SmithSep 9, 2025
  If the float valve does not rise in your Instant Pot Electric Pressure Cooker, it could be due to several reasons. First, check for food debris on the float valve or its silicone cap and clean it thoroughly. Also, ensure there's enough liquid in the inner pot, adding 1 1/2 cups for a 6 Qt cooker or 2 cups for an 8 Qt cooker. Make sure the float valve silicone cap isn't damaged or missing; if it is, install or replace the float valve. Additionally, check if the float valve is obstructed by the lid-locking mechanism; if so, tap the float valve with a long utensil.

Instant Pot VIVA Series Specifications

General

Model	VIVA Series
Material	Stainless Steel
Power	1000 Watts
Keep Warm Function	Yes
Functions	Pressure Cook, Slow Cook, Steam, Sauté, Rice, Yogurt
Capacity	6 Quart
Safety Features	Overheat Protection, Safety Lock
Pressure Levels	High and Low
Delay Start	Yes
Dimensions	13.4 x 12.2 x 12.5 inches
Programs	15 One-Touch Smart Programs