1918
Smart Program Settings Smart Program Settings
Cancel and Standby Mode
When the cooker is plugged in but not in operation, the display reads OFF to
indicate Standby mode.
Press Cancel to stop a Smart Program at any time. The cooker returns to
Standby mode.
Turn Sound On/Off
Sound On: When in Standby, press and hold + button until display indicates S On.
Sound Off: When in Standby, press and hold − button until display indicates SOFF.
Note: Audible safety alerts (beeps) cannot be turned off.
Adjust Temperature Scale: Fahrenheit and Celsius
Press both − and + buttons simultaneously twice. Default temperature unit will
be displayed.
Press the + button repeatedly, to toggle between °F and °C.
Note: Temperature is only displayed within the Sous Vide Smart Program.
Set a Delay Start Timer
Delay Start can be set to a minimum of 10 minutes or a maximum of 24 hours.
1. Select a Smart Program and adjust the settings as you desire, then press
Delay Start.
Note: Once Delay Start has been selected, there is no way to return to the cooking
settings. To adjust Smart Program settings, press Cancel and enter new selections.
2. When the hours eld ashes, use the − / + buttons to adjust the delay time.
E.g., 02:00 indicates that cooking will start after 2 hours.
3. Press Delay Start again to toggle to the minutes eld and follow the same
process as the previous step.
4. Delay Start begins automatically after 10 seconds and the timer counts down.
5. When Delay Start ends, the Smart Program begins, and the display indicates On.
Delay Start is not available with the Sauté, Sous Vide or Yogurt Smart Programs.
Automatically Keep Food Warm After Cooking
The Keep Warm setting turns on automatically after cooking on all Smart
Programs except Sauté, Sous Vide and Yogurt.
When automatic warming begins, the timer begins counting from 00:00 to
indicate the time passed, up to 10 hours.
To turn automatic warming off, press Keep Warm. The LED above the button dims
to indicate that it is off.
Reheat Food or Keep Warm for Long Periods
When in Standby, select Keep Warm. Press Keep Warm again to cycle through
Less, Normal and More warming temperature levels.
Use the − / + buttons to set a warming timer up to 99 hours 50 minutes.
Keep Warm begins automatically after 10 seconds.
When Keep Warm completes, the display indicates End.
Reset Smart Programs to Factory Default Settings
Reset Individual Smart Programs
With the cooker in Standby mode, press and hold one Smart Program button until
the cooker returns to Standby and displays OFF.
The Smart Program’s pressure level, cooking time and temperature are restored to
the factory default setting.
Reset All Smart Programs
With the cooker in Standby mode, press and hold Cancel until the cooker beeps.
All Smart Program pressure levels, cooking times and temperatures are restored
to the factory default setting.
To Next Page
Loading...
Need help?
General
