7
User Manual
INITIAL SETUP
1. Pull the Instant™ Infusion Brew and all accessories out of the box.
2. Remove all packaging materials from within and around the unit.
3. Place the unit on a dry, stable and level surface.
4. Plug in your Instant™ Infusion Brew.
Setting the Clock
When you first turn on your Instant
™
Infusion Brew, the clock display
will show the default time of 12:00 AM. Setting and changing the time
is quick and easy.
1. Make sure your Infusion Brew is turned on.
2. Press the and buttons on the control panel until the correct
time is set. To speed up, press and hold for 2 seconds.
Anytime the display is in ready/standby mode, you can re-enter time setting
mode. Simply press and hold either the or button to set or change
the time.
3. Press the button to save the new time.
4. Your clock is now set!
Clean before use
1. Lift the water reservoir up to remove from the coffee maker.
2. Handwash the glass pot, water reservoir, reusable coffee filter
and brew basket with warm water and dish soap. Rinse with
warm, clear water. Wipe with a clean, dry cloth.
3. With a damp cloth, wipe down the coffee maker base and
control panel.