instantpot.co.uk | 17
Settings
Setting Description
Set a Delay Start timer.
Delay Start can be set from between
10 minutes (00:10) and 24 hours (24:00).
01 Select a Smart Programme and tweak it as
needed, then press Delay Start.
Once pressed, there is no way to go back
to the Smart Programme settings. You’ll
have to press Cancel and start again.
02 When the hours eld ashes, use the
− / + buttons to adjust the hours.
03 Press Delay Start again to toggle to the
minutes eld and use the − / + buttons
to adjust the minutes.
04 The Delay Start timer starts automatically
after 10 seconds.
When Delay Start ends, the Smart Programme
begins and the display shows On.
Delay Start is not available with the Sauté
or Yogurt Smart Programmes.
Reset an individual smart programme.
When in standby, press and hold one Smart
Programme button until the multicooker
returns to Standby and displays OFF.
The Smart Programme’s pressure level,
cooking time and temperature are restored to
the factory default setting.
Reset all smart programmes.
When in standby, press and hold Cancel until
the multicooker beeps.
All Smart Programme pressure levels, cooking
times and temperatures are restored to the
factory default setting.
Duo-UK-ENG-Full_Manual-2021-03-03.indd 17Duo-UK-ENG-Full_Manual-2021-03-03.indd 17 3/3/21 3:33 PM3/3/21 3:33 PM
To Next Page
Loading...
