16
User Manual
How to SyncCook
™
1. Follow the instructions for Cooking on page 7 and any specific
instructions for the Smart Program you want to use.
2. After you’ve set up your first program (in either zone) but before
pressing Start, press SyncCook.
The SyncCook icon displays.
3. Then press START and continue following the instructions for Cooking.
About SyncCook
• You can change the cooking time and temperature settings for
both zones (SyncCook will remain ON) by adjusting the cooking
time or temperature.
• You can change the cooking time and temperature settings for either
zone (SyncCook will turn OFF) by pressing 1 or 2 to select a zone to
change and then adjusting the cooking time or temperature.
• If you remove the food from one zone during cooking, the other
zone will keep cooking. The display will still show the SyncCook
icon, but the cooking times will be different in each zone.
Ending SyncCook
You can end SyncCook at any time to make changes to one or both
cooking programs.
1. Press 1 or 2 to select the zone you’d like to make changes to.
SyncCook stops and the icon no longer displays.
2. Adjust the cooking time or temperature settings and press the
Control Dial to confirm the changes.
3. Press Start to continue cooking, with each zone cooking with
its own program and settings.
To Next Page
Loading...
