9
User Manual
INITIAL SET UP
Unpack
1. Remove your new Vortex air fryer from the box.
2. Remove all the packaging material from in and around the air fryer.
3. Make sure to remove all the accessories from inside the air fryer.
4. Don’t remove the safety warning stickers or the rating label from
the air fryer.
Clean before use
1. Wipe the interior with a damp cloth. Use a clean, soft cloth to dry.
2. Wash the accessories with hot water and dish soap. Rinse with
warm, clear water and use a soft cloth to dry.
Placement
1. Place your Vortex air fryer on a stable, level surface, away from
combustible material and external heat sources. Do not place your
Vortex air fryer on top of another appliance.
2. Make sure to leave at least 5 in / 13 cm of space above and around
all sides of the appliance to allow for sufficient air flow.
Test run
Before using your new Vortex air fryer for the first time, perform a test
run to ensure everything is working correctly.
To perform a test run:
1. Insert the basket and cooking tray into the air fryer, but do not
add food.
2. Select the Air Fry cooking program on the Control Panel.
3. Single Zone cooking activates by default.
To learn more about Single Zone and Dual Zone cooking, see “Introduction
to Zone Cooking” below.
To Next Page
Loading...
Need help?
General