13
Attach the Handlebar
WARNING!
If the handlebar is not securely in place it may
fall off the trailer, causing in the operator to lose
control and result in serious injury or death. Always
check the handlebar is securely in place before
use of the trailer as a stroller.
1.
Snap the handlebar on to the rear of the frame.
2.
Turn the attachment knobs (both sides) until
they are rmly in place.
3.
Check the handlebar by pulling back and forth
to ensure it is securely attached to the frame.
1.
Pull the brake release lever out.
2.
Insert the post coming from the wheel fork
into the hole on the bottom of the front wheel
bracket, and release the lever.
3.
Check that the wheel is securely in place by
pulling down on the wheel.
Use as a Stroller
Attaching the Front Wheel
Note: If the trailer is attached to the bicycle see
Removing the Trailer on Page 15.
WARNING!
Do not use the Stroller with inline or roller skates.
When using the front stroller wheel, wrap the
safety strap around the tow bar so it doesn’t
interfere with the front wheel operation.
Wheel
release lever
Wheel post
Safety strap
To Next Page
Loading...
Need help?
General
