EasyManuals Logo

InStep QUICK N EZ User Manual

InStep QUICK N EZ
18 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #16 background imageLoading...
Page #16 background image
14
Avoid injury. Always engage the parking brakes
when stopping, releasing the handle or loading or
unloading children.
WARNING!
Using the Parking Brake Strap
Note: Only use the parking brake strap while in the
stroller mode.
Storing the Trailer
1.
Remove the ag and pole. Separate the ag
pole sections.
2.
Remove the rear wheels:
a. Find the release lever on the wheel bracket.
b. Pull the release lever straight out and hold.
c. Remove the wheel.
d. Release the lever.
3.
Remove the locking pin from the tow bar
bracket (located at the front corner of the
trailer).
4.
Fold the tow bar underneath the trailer.
5.
Place the locking pin back through the tow bar
and bracket.
6.
Place all loose items inside the passenger
compartment.
7.
Carefully fold the frame down.
8.
Store in a dry place.
Important! If the storage area is hot then release
some air from the tires. This will help prevent
excessive expansion or popping.
WARNING!
There are pinch points between the sidewalls and
the frame of the trailer that may cause injury.
Always fold or unfold the trailer slowly and with
caution. Keep children clear when folding or
unfolding the trailer.
1.
Wrap the brake strap through the rear wheel
and around the back of the trailer frame.
2.
Fasten the brake strap clip to the opposite end
of the brake strap.
Brake
strap clip
Brake
strap

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the InStep QUICK N EZ and is the answer not in the manual?

InStep QUICK N EZ Specifications

General IconGeneral
BrandInStep
ModelQUICK N EZ
CategoryBicycle
LanguageEnglish

Related product manuals