The eDry kit includes the following:
1 thin film spreader
1 rack with 5 shelves
10 metal pans and silicone liners (5 for testing and 5 for
preparing the next sample)
CoreDry control board (necessary for older models)
Preparing a Sample
1. Prepare a space with a protective sheet to capture any
spills of the emulsion.
2. Weigh a clean silicone sheet and metal pan to the
nearest 0.01 g.
3. Remove the silicone sheet from the metal pan. Pour
emulsion on the silicone sheets to form a circle
approximately the size of a quarter toward one edge of
the sheet.
To Next Page
Loading...