Important
CoreDry units are shipped within the Continental
United States with oil in the pump – the additional oil
shipped with the unit is for your next oil change.
CoreDry units shipped outside the Continental United
States are WITHOUT oil in the pump. An extra bottle is
shipped with the unit for filling before use.
************************************************************
PRECAUTIONS WHEN USING THE COREDRY
1. There is an air heater located inside the
CoreDry to maintain the sample at room
temperature. The heat is on during flow cycle.
THE BOTTOM OF THE DRYING CHAMBER MAY BE
VERY HOT DURING AND AFTER COMPLETION OF
THE TEST.
2. Be aware that the vapor trap reaches
temperatures below freezing.
3. Voltage of 120V is present inside the CoreDry
cabinet. DO NOT PROBE INTO THE MAIN
CABINET WITH CONDUCTIVE MATERIALS, TOOLS,
FINGERS OR HANDS. IF COVER MUST BE
REMOVED CONTACT INSTROTEK FIRST.
To Next Page
Loading...