Integra DPS-5.4 User Manual (English)

Other manuals for Integra DPS-5.4

Questions and Answers:

C
Crystal GibbsAug 22, 2025
What to do if Integra DVD Player DPS-5.4 won't turn on?
- R
  Rick ManningAug 22, 2025
  If your Integra DPS-5.4 DVD player won't turn on, consider these potential causes: * Ensure the power cord is securely connected to a working wall outlet. * Check that the [Power] switch is set to On. * If external interference is affecting the DPS-5.4’s digital circuitry, turn off the unit, wait five seconds, and then try turning it on again. If that doesn’t work, disconnect the power cord from the wall outlet, wait five seconds, reconnect it, and then try turning the unit on again.
J
John BruceAug 25, 2025
Why Integra DPS-5.4 DVD Player picture appears stretched?
- K
  Katelyn RamirezAug 25, 2025
  If the picture on your Integra DVD Player appears stretched or is the wrong shape, it might be due to the following: * The TV Screen setting is incorrect. Adjust it to match the aspect ratio of your TV. * If you're using an S-Video cable, the picture may appear stretched in some cases. Try changing the S-Video Out setting to “S1.”
M
marvinjenkinsAug 27, 2025
How to fix Integra DVD Player DPS-5.4 no picture?
- C
  Carrie GriffinAug 27, 2025
  If you're not getting a picture from your Integra DPS-5.4 DVD player, here are a couple of things to check: * Make sure you've selected the correct input source on your TV to which the DPS-5.4 is connected. * Check the video cable to ensure it is properly connected.
W
Wendy VargasAug 27, 2025
Why Integra DPS-5.4 DVD Player buttons don't work?
- G
  Gregory ManningAug 28, 2025
  If the buttons on your Integra DPS-5.4 DVD player and remote controller aren't working, it could be due to power supply voltage fluctuations or other anomalies like static electricity interfering with normal operation. Try turning off the DPS-5.4, waiting five seconds, and then turning it back on. If that doesn't work, disconnect the power cord from the wall outlet, wait five seconds, reconnect it, and then try again.
M
Melissa BenitezAug 29, 2025
How to fix Integra DPS-5.4 disc tray won't close?
- J
  Jacob TaylorAug 29, 2025
  If the disc tray on your Integra DVD player isn't closing properly, it might be because: * The disc is not centered in the disc tray. Make sure to place the disc in the center. * The disc is dirty. Remove the disc and clean it.
Q
qwalkerAug 31, 2025
Why Integra DVD Player can't start playback?
- N
  Nicholas SmithAug 31, 2025
  If you're having trouble starting playback on your Integra DVD player, consider these potential issues: * Ensure a disc is loaded. * Verify the disc is compatible. * Make sure the disc is loaded correctly (right side up). * Confirm the disc is centered in the disc tray. * Check if the disc is dirty and needs cleaning. * If the disc uses parental lock, ensure the Parental Lock function is turned off. * Check if the DVD-Video disc is intended for use in another region; if the region numbers don't match, the disc can’t be played.
S
Samuel ConnerSep 1, 2025
Why Integra DPS-5.4 picture distorts?
- A
  Amy SchmittSep 2, 2025
  If you notice occasional picture distortion on your Integra DVD player, it could be due to: * A dirty disc. Try removing the disc and cleaning it. * Using the Fast Forward or Fast Reverse function, which may cause some picture distortion. This is normal.
B
Brian NicholsSep 3, 2025
How to resolve Integra DPS-5.4 picture instability?
- C
  Cassandra GonzalesSep 3, 2025
  If you're experiencing picture instability or noise with your Integra DPS-5.4 DVD player, it could be because the DPS-5.4 is connected to your TV via a VCR or other video equipment, and a copy-protection system is affecting the picture. Try connecting the DPS-5.4 directly to your TV.
W
William AllenSep 5, 2025
Why Integra DPS-5.4 DVD Player settings are not saved?
- D
  Dalton McclainSep 5, 2025
  If your Integra DPS-5.4 DVD player isn't saving settings, it's likely because a power failure occurred, or the power cord was disconnected. To prevent this, before disconnecting the power cord, set the DPS-5.4 to Standby by pressing the [Standby/On] button, and wait until “GOOD BYE” has disappeared from the display.
K
Kathleen ReyesSep 7, 2025
Why Integra DPS-5.4 DVD Player brightness is unstable?
- A
  amanda39Sep 7, 2025
  If you're experiencing unstable brightness or a noisy picture with your Integra DPS-5.4 DVD player, it could be due to: * The DPS-5.4 being connected to your TV via a VCR or other video equipment, with a copy-protection system affecting the picture. Try connecting the DPS-5.4 directly to your TV. * Your TV not supporting progressive scanning. In this case, reset the DPS-5.4 to its initial settings.

Integra DPS-5.4 Specifications

General

Type	DVD Player
Video Output	Composite, S-Video, Component
Progressive Scan	Yes
Surround Sound	Dolby Digital, DTS
Remote Control	Yes
Output Resolution	480p, 720p, 1080i
Video Formats	DVD Video
Audio Formats	Dolby Digital, DTS, MP3
Audio Output	Digital audio (optical)
Video D/A Converter	10-bit
Audio D/A Converter	192kHz / 24-bit
Channels	2.0

Related product manuals

Integra DPS-5.4 Service Manual

Table of Contents

Other manuals for Integra DPS-5.4

Questions and Answers:

Integra DPS-5.4 Specifications

Related product manuals