63
Playback
Playing Back
1. Do the play operations on the AV component connected to this unit. Do the
play operations on this unit when the input is TUNER or NET.
You cannot adjust the volume of the BLUETOOTH wireless technology
enabled device on this unit. Adjust on the connected BLUETOOTH wireless
technology enabled device.
• You cannot transmit audio to multiple BLUETOOTH wireless technology
enabled devices from this unit.
• Audio is also output from the speakers connected to this unit.
• The coverage area is approx. 48´/15 m. Note that connection is not always
guaranteed with all BLUETOOTH enabled devices.
• When "Bluetooth Transmitter" is "On" and in the following cases, when this
unit detects a paired BLUETOOTH wireless technology enabled device, it will
automatically reconnect with that device.
– When the power is turned on again after the unit is switched to standby
– While other than "BLUETOOTH" is selected
– When the "NET" input is selected and there is audio output from a network
service/content (some services excluded)
When not using this function, select "Off" in "Bluetooth Transmitter" to cancel
the connection. Also disconnect on the receiving device (if disconnection is
possible on the receiving device).
• Audio cannot be output from a BLUETOOTH wireless technology enabled
device in the following cases:
– When the audio le is DSD format
– When playing audio from one of the following network services:
Chromecast built-in, Amazon Music, Amazon Alexa, AirPlay, DTS Play-Fi
• Sound quality adjustments and listening modes of this unit cannot be applied
to the output audio.
To Next Page
Loading...
Need help?
General
