86
Playback
• When video and audio via HDMI input are output to ZONE 2, set
"1. Input/Output Assign" - "TV Out / OSD" - "Zone 2 HDMI" ( →p101) to
"Use" on the Setup menu.
• DSD audio signals cannot be output to ZONE 2 with the "NET" input selector.
• If ZONE 2 is on, power consumption during standby will increase.
To disable the function: While pressing and holding the Zone 2 Shift button on
the remote controller, press
. Alternatively press Off on the main unit.
To Next Page
Loading...
