Integra DRX-3.2 - Page 133

133
Front Panel≫ Rear Panel≫ Remote≫
Contents
≫
Connections
≫
Playback
≫
Setup
≫
Setting Item Default Value Setting Details
PHONO Main/Zone 2/
Zone 3
Set the 12V trigger output setting to each input.
"O󰀨": No output
"Main": Output when "PHONO" is selected as input
for main room.
"Zone 2": Output when "PHONO" is selected as
input for ZONE2.
"Main/Zone 2": Output when "PHONO" is selected
as input for main room or ZONE2.
"Zone 3": Output when "PHONO" is selected as
input for ZONE3.
"Main/Zone 3": Output when "PHONO" is selected
as input for main room or ZONE3.
"Zone 2/Zone 3": Output when "PHONO" is
selected as input for ZONE2 or ZONE3.
"Main/Zone 2/Zone 3": Output when "PHONO"
is selected as input for main room, ZONE2 or
ZONE3.
TUNER Main/Zone 2/
Zone 3
Set the 12V trigger output setting to each input.
"O󰀨": No output
"Main": Output when "TUNER" is selected as input
for main room.
"Zone 2": Output when "TUNER" is selected as
input for ZONE2.
"Main/Zone 2": Output when "TUNER" is selected
as input for main room or ZONE2.
"Zone 3": Output when "TUNER" is selected as
input for ZONE3.
"Main/Zone 3": Output when "TUNER" is selected
as input for main room or ZONE3.
"Zone 2/Zone 3": Output when "TUNER" is selected
as input for ZONE2 or ZONE3.
"Main/Zone 2/Zone 3": Output when "TUNER"
is selected as input for main room, ZONE2 or
ZONE3.
Setting Item Default Value Setting Details
NET Main/Zone 2/
Zone 3
Set the 12V trigger output setting to each input.
"O󰀨": No output
"Main": Output when "NET" is selected as input for
main room.
"Zone 2": Output when "NET" is selected as input
for ZONE2.
"Main/Zone 2": Output when "NET" is selected as
input for main room or ZONE2.
"Zone 3": Output when "NET" is selected as input
for ZONE3.
"Main/Zone 3": Output when "NET" is selected as
input for main room or ZONE3.
"Zone 2/Zone 3": Output when "NET" is selected as
input for ZONE2 or ZONE3.
"Main/Zone 2/Zone 3": Output when "NET" is
selected as input for main room, ZONE2 or ZONE3.
BLUETOOTH Main/Zone 2/
Zone 3
Set the 12V trigger output setting to each input.
"O󰀨": No output
"Main": Output when "BLUETOOTH" is selected as
input for main room.
"Zone 2": Output when "BLUETOOTH" is selected
as input for ZONE2.
"Main/Zone 2": Output when "BLUETOOTH" is
selected as input for main room or ZONE2.
"Zone 3": Output when "BLUETOOTH" is selected
as input for ZONE3.
"Main/Zone 3": Output when "BLUETOOTH" is
selected as input for main room or ZONE3.
"Zone 2/Zone 3": Output when "BLUETOOTH" is
selected as input for ZONE2 or ZONE3.
"Main/Zone 2/Zone 3": Output when
"BLUETOOTH" is selected as input for main room,
ZONE2 or ZONE3.