Need help?Do you have a question about the Integra DTR-5.6 and is the answer not in the manual?
General| Channels | 7.1 |
|---|---|
| HDMI Inputs | 4 |
| HDMI Outputs | 1 |
| Frequency response | 10 Hz - 100 kHz |
| Total harmonic distortion | 0.08% |
| Input sensitivity | 200 mV |
| Signal to noise ratio | 100 dB |
| Digital inputs | Optical, Coaxial |
| Power Output | 100 W per channel (8 ohms) |
| Audio Formats Supported | Dolby TrueHD, DTS-HD Master Audio, Dolby Digital, DTS |
| Network Connectivity | Ethernet |
| Tuning range | FM |
| Speaker load impedance | 6 Ohms to 16 Ohms |
| Video Connections | HDMI, Composite |
| Video Inputs | 1 Composite |
| Audio Inputs | RCA |
| Dimensions | 435 x 174 x 431 mm |
Essential safety instructions and warnings for operating the AV receiver.
General precautions including handling, power, and environmental considerations.
Information for US and Canadian models regarding compliance.
List of accessories included with the AV receiver.
Overview of the AV receiver's amplifier, processing, tuner, and other features.
Initial steps before operating the AV receiver.
Instructions for inserting batteries into the remote controller.
Guidance on connecting front, center, surround, and subwoofer speakers.
How to connect the subwoofer pre-out to the powered subwoofer.
Instructions for connecting AM and FM antennas.
Instructions for connecting the supplied AM loop and FM antennas.
How to connect audio and video signals from components.
Steps for connecting a TV or projector to the AV receiver.
Instructions for connecting a DVD player to the AV receiver.
Connecting VCR/DVD recorder for playback and TV tuning.
Connecting satellite, cable, or set-top boxes to the AV receiver.
Connecting camcorders, game consoles, or other devices.
Instructions for connecting a CD player to the AV receiver.
Connecting turntables with or without a built-in phono preamp.
Connecting cassette decks, CDR, MiniDisc, or DAT recorders.
Connecting a power amplifier for enhanced audio output.
Connecting Integra components via the Remote Interactive (RI) system.
Connecting power cords and the RS232 port for control.
Procedures for turning the AV receiver on and putting it into standby.
Guide to initial setup procedures before first use.
Guide to the automatic speaker setup process.
Configuring component video inputs and outputs.
Steps for selecting sources, starting playback, and adjusting volume.
Instructions for tuning AM/FM and XM radio stations.
Manual and auto tuning, and weak station reception.
Setup, connection, and signing up for XM Satellite Radio.
Connecting DVD players with multichannel analog audio.
General functions like speaker levels, display, muting, sleep timer.
Temporarily adjusting the volume of individual speakers.
Setting the sleep timer and connecting headphones.
Selecting and understanding various listening modes.
How to select listening modes via receiver or remote.
Detailed descriptions of various listening modes like Direct, Stereo, Dolby, DTS.
Instructions for recording audio and video sources.
Navigating and using the AV receiver's setup menus.
Introduction to the initial setup process and its steps.
Introduction to the advanced setup options for customization.
Configuring speaker settings like size, distance, and crossover.
Correcting audio/video sync issues during progressive scanning.
Customizing settings like volume, display, and triggers.
Setting and matching remote control and receiver IDs.
Specifying signal format (PCM or DTS) for digital inputs.
Overview of Zone 2 functionality and connections.
Connecting speakers for Zone 2 playback.
Configuring Powered Zone 2 and Zone 2 Out settings.
Turning Zone 2 on/off and selecting sources.
Adjusting volume, tone, and balance for Zone 2.
Using kits for remote control in Zone 2 or cabinets.
Controlling external components with the remote.
How to program remote control codes for other devices.
How to teach the remote new commands.
Programming macro buttons for sequences of actions.
Solutions for problems with turning the receiver on or it shutting off.
Troubleshooting no sound, quiet sound, or incorrect speaker output.
Troubleshooting issues with only certain speakers producing sound.
Solutions for picture problems and noisy radio reception.
Troubleshooting remote control and recording problems.
To Next Page
