Need help?Do you have a question about the Integra DTR-50.1 and is the answer not in the manual?
Guidelines for cleaning, handling, and general care of the AV receiver to ensure longevity.
Region-specific warnings and compliance information for US and Canadian models.
Details on the AV receiver's power output and amplification technology.
Overview of available input and output ports for connecting external devices.
Explanation of THX Select2 Plus certification and its benefits for home theater audio.
Detailed description of the controls and indicators located on the front of the AV receiver.
Step-by-step instructions for inserting batteries into the remote control.
Guidance on proper positioning and orientation for effective remote control operation.
An introduction to setting up a home theater system for an immersive audio experience.
Guidance on speaker configuration and connecting speaker cables to the AV receiver.
Specific instructions for connecting and positioning dipole speakers for surround sound.
Detailed steps for stripping and connecting speaker cables to the AV receiver terminals.
Instructions for connecting front speakers using the bi-amping method for improved audio performance.
How to connect the supplied indoor FM antenna for radio tuning.
How to assemble and connect the supplied AM loop antenna for radio tuning.
Guidance on connecting an external FM antenna for improved reception.
Guidance on connecting an external AM antenna for improved reception.
General information and color coding for AV cable connections.
Handling and connection of optical digital audio jacks.
Explanation of common AV cable types and their corresponding jacks.
Introduction to HDMI technology and its role in digital AV connections.
Step-by-step guide for establishing HDMI connections between components.
How to connect both audio and video signals for simultaneous selection.
Guidance on choosing the most appropriate video connection format.
Configuring the Monitor Out setting for HDMI and analog video outputs.
Overview of available audio connection formats supported by the AV receiver.
Instructions for connecting an RI Dock, typically for iPod integration.
How to connect optional components using the Universal Port.
Instructions for connecting the AV receiver to a power outlet.
Procedures for powering the AV receiver on and switching it to standby mode.
Configuring video output settings for the connected display device.
How to choose the display language for the AV receiver's setup menus.
Navigating and using the onscreen menus for AV receiver configuration.
How to adjust settings using the AV receiver's front panel display.
Additional notes and tips regarding Monitor Out and Resolution settings.
Adjusting speaker impedance and front speaker type for optimal audio output.
Specifying connected speakers and crossover frequencies for each channel.
Setting speaker distances for accurate sound localization and timing.
Adjusting individual speaker levels for balanced sound output.
Fine-tuning speaker tone using a 15-band equalizer.
Guidelines for microphone placement at multiple listening positions for accurate calibration.
Explanations and solutions for common error messages during Audyssey setup.
Troubleshooting advice for speaker detection errors during setup.
Guidance for resolving issues when saving setup data fails.
How to choose the desired audio or video input source for playback.
How to manually adjust bass and treble levels for the front speakers.
Viewing details about the current input source and its signal format.
Adjusting the brightness of the AV receiver's front panel display.
How to temporarily mute or unmute the AV receiver's audio output.
Setting the AV receiver to automatically turn off after a specified period.
Choosing the priority for front high, front wide, or surround back speakers.
Connecting and using headphones for private listening.
Setting up and executing one-button commands for multiple device actions.
Reassigning components to source inputs for custom macro control.
Switching between Easy Macro and Normal Macro modes.
Resetting macro settings or the entire remote controller to default.
Methods for tuning radio stations using auto or manual modes.
Storing favorite radio stations as presets for quick access.
How to select stored radio presets.
Removing stored radio presets.
Optimal placement of the SIRIUS antenna for best signal reception.
Selecting SIRIUS channels by searching through available options.
Finding SIRIUS channels by browsing through different categories.
Tuning to a SIRIUS channel by directly entering its number.
How to switch to the previously listened-to SIRIUS channel.
Storing favorite SIRIUS Satellite Radio channels as presets.
How to select stored SIRIUS Satellite Radio channels.
Removing stored SIRIUS Satellite Radio channels.
Procedure for changing the PIN used for parental lock settings.
How to view channel names, categories, and artist information.
Explanation of Radio Data System (RDS) technology and its features.
Viewing text information broadcast by RDS-enabled radio stations.
Searching for radio stations based on their program type.
Locating radio stations that broadcast traffic news updates.
Introduction to the UP-A1 Dock and its capabilities for playing iPod content.
Techniques for recording audio and video from different sources simultaneously.
Methods for choosing listening modes on the AV receiver or via remote control.
Table showing available listening modes based on source format and speaker layout.
Detailed explanations of various listening modes and their intended use.
Overview of the menu structure and categories for AV receiver settings.
Configuring input and output assignments for various audio and video signals.
Adjusting picture brightness, contrast, hue, and saturation settings.
Assigning HDMI input sources to specific input selectors for proper signal routing.
Assigning component video inputs to input selectors for proper signal routing.
Assigning digital audio inputs (optical/coaxial) to input selectors.
Detailed settings for speaker configuration, crossover frequencies, and levels.
Adjusting speaker impedance and front speaker type for optimal audio output.
Specifying connected speakers and crossover frequencies for each channel.
Setting speaker distances for accurate sound localization and timing.
Adjusting individual speaker levels for balanced sound output.
Fine-tuning speaker tone using a 15-band equalizer.
Configuring THX-specific audio settings for optimal movie and music playback.
Adjusting various audio settings like tone, volume, and listening modes.
Specific settings for Dolby listening modes like PLIIx Music and Dolby EX.
Configuring Audyssey Dynamic EQ, Dynamic Volume, Stage Width, and Stage Height.
Adjusting listening angle for the Theater-Dimensional mode.
Setting the subwoofer level for different digital audio sources.
Configuring settings specific to each input source, like IntelliVolume and A/V Sync.
Adjusting input levels for individual source components to balance volume.
Correcting audio/video synchronization issues for connected sources.
Customizing input selector names for easier identification.
Adjusting picture quality settings like brightness, contrast, and game mode.
Enabling Game Mode to reduce video signal delay for better gaming response.
Adjusting the aspect ratio for video playback.
Using ISF settings for professional video calibration based on room lighting.
Adjusting volume display modes, muting levels, maximum volume, and power-on volume.
Configuring onscreen display settings like immediate display and position.
Configuring 12V trigger outputs for automatic component activation.
Setting the remote control ID to avoid interference with other components.
Configuring settings for multi-zone audio playback.
Settings related to FM/AM frequency steps, satellite radio mode, and antenna aiming.
Configuring HDMI settings, including Audio TV Out and Lip Sync.
Enabling HDMI Lip Sync to automatically correct audio/video delay.
Enabling x.v.Color support for enhanced color reproduction if supported.
Enabling RIHD for system control of HDMI-compatible components.
Enabling power control for HDMI-connected components.
Enabling TV control of the AV receiver via HDMI.
Accessing network settings for internet radio and file streaming.
Instructions for updating the AV receiver's firmware.
Adjusting bass and treble for front speakers.
Reducing dynamic range for late-night listening at low volumes.
Compensating for harsh high frequencies in soundtracks for home theater viewing.
Adjusting dynamic volume for consistent playback levels across different content.
Enhancing sound quality for compressed music files.
Manually adjusting volume levels for individual speakers.
Setting audio input priorities between digital and analog sources.
Correcting audio/video synchronization issues.
Specifications and requirements for connecting the AV receiver to a home network.
Guide to configuring Windows Media Player for music sharing with the AV receiver.
List of audio file formats supported for playback via network or USB.
Minimum system requirements for using computers or media servers with the AV receiver.
Explanation of the Digital Living Network Alliance and its role in interoperable networks.
Manually configuring network settings such as IP address and DNS server.
Information about the AV receiver's MAC address.
How DHCP settings affect automatic network configuration.
Manually setting the IP address for network connections.
Manually setting the subnet mask address.
Manually setting the gateway address for network connections.
Manually setting the DNS server addresses.
Entering the URL for a web proxy server.
Entering the port number for a web proxy server.
Enabling or disabling network control features.
Network port number used for control.
Information about playing music files from USB mass storage devices.
Enabling random playback of music files.
Setting repeat playback modes for music files.
Overview of the AV receiver's multi-zone audio capabilities for different rooms.
Instructions for connecting speakers and audio sources to Zone 2.
Connecting Zone 2 speakers directly to the AV receiver's terminals.
Connecting Zone 2 speakers to a separate amplifier for Zone 2 audio.
How to output video signals to a TV in Zone 2 for simultaneous audio/video playback.
Instructions for connecting speakers and audio sources to Zone 3.
Connecting Zone 3 speakers directly to the AV receiver's terminals.
Connecting Zone 3 speakers to a separate amplifier for Zone 3 audio.
Activating powered zone outputs for Zone 2 and Zone 3 speaker connections.
Configuring multi-zone settings such as Zone output, maximum volume, and power-on volume.
Setting Zone 2/3 output to variable or fixed for volume control.
Turning zones on/off, selecting input sources, and adjusting volume for Zone 2/3.
Operating Zone 2/3 functions directly from the AV receiver's front panel.
Using the remote control to manage Zone 2/3 operations.
Adjusting the volume for Zone 2 and Zone 3.
Muting audio output for specific zones.
Fine-tuning bass, treble, and balance for Zone 2 and Zone 3 audio.
Connecting multiroom kits for remote control in Zone 2/3.
Setting up multiroom kits when the receiver is inside a cabinet.
Using IR emitters to control other components via multiroom kits.
List of components with preprogrammed remote control codes.
How to find and enter remote control codes for other devices.
Specific remote codes for Integra/Onkyo components connected via RI.
Restoring default remote control codes for specific mode buttons.
Restoring the entire remote controller to its factory default settings.
Removing learned commands from the remote controller.
Steps to create custom macro sequences for one-button control.
Executing programmed macro sequences.
Removing programmed macros.
Troubleshooting steps for power-related issues like not turning on or turning off automatically.
Solutions for audio problems such as no sound, quiet sound, or incorrect speaker output.
Troubleshooting steps when surround speakers are not producing sound.
Troubleshooting steps when the center speaker is not producing sound.
Troubleshooting steps when these specific speakers are not producing sound.
Troubleshooting steps when the subwoofer is not producing sound.
Resolving sound issues related to specific signal formats.
Troubleshooting playback issues with 6.1/7.1 surround sound.
Steps to resolve issues related to no video output or distorted pictures.
Troubleshooting steps when the AV receiver's onscreen menus are not displayed.
Resolving picture distortion issues, especially for Australian models.
Troubleshooting radio reception problems.
Steps to resolve issues with the remote controller's functionality.
Troubleshooting issues with controlling connected external components.
Resolving problems when learning commands from other remote controllers.
Troubleshooting issues related to the iPod Dock, including no sound or video.
Troubleshooting issues related to recording functions.
Troubleshooting issues with multi-zone playback.
Troubleshooting connection and playback issues with music servers and internet radio.
Resolving playback interruptions from music servers.
Troubleshooting network connection issues for web browser access.
Resolving issues accessing music files from USB devices.
Troubleshooting sound changes when headphones are connected.
Changing the language for multiplex audio sources.
Troubleshooting issues with the RI (Remote Interactive) function.
Resolving issues with Auto Power On and Direct Change functions for RI-connected components.
Important notes on video playback quality and potential issues with upconversion.
Detailed specifications for the AV receiver's amplifier performance.
To Next Page
General
