Need help?Do you have a question about the Integra DTR-50.4 and is the answer not in the manual?
Details on the receiver's amplifier specifications and design.
Information on the receiver's audio and video processing technologies.
Identifies controls and indicators on the receiver's front panel.
Details the various input and output jacks on the receiver's rear panel.
Instructions on how to operate the AV receiver using the remote controller.
Guidance on setting up speaker configurations and connecting speaker cables.
Diagram illustrating connections for 9.1 channel playback using an external amplifier.
Important safety and connection guidelines for speakers.
Details on HDMI connections for digital video and audio transfer.
Describes the component video connection for higher quality picture.
Specific instructions for connecting components using HDMI cables.
Explanation of the ARC function for sending TV audio back to the receiver.
Steps for performing automatic speaker setup using Audyssey MultEQ XT32.
Checks connections of various source components.
Procedures for auto and manual tuning of radio stations.
Guide to searching for radio stations based on program type.
Steps and guidelines for performing audio measurements for room correction.
Detailed steps for the Audyssey MultEQ XT32 auto setup process.
How to manually adjust speaker settings after automatic setup.
Identifies buttons on the remote for selecting listening modes.
Shows which speakers are activated for each channel configuration.
Details on Dolby Pro Logic IIx modes for 7.1 channel playback.
Details on DTS Neo:X modes for multi-channel surround sound.
Information on Audyssey DSX system for improved surround impression.
Explanation of THX modes for optimized movie theater sound.
Accessing internet radio and network media playback.
Playing content from USB devices like iPods and flash drives.
Accessing common on-screen setup menu settings.
Quick access to frequently used settings for changing and viewing information.
Comprehensive menu for changing various receiver settings.
Selecting input sources and viewing related information.
Changing various audio settings like sound program, bass, treble.
Adjusting bass and treble for front speakers.
Selecting whether video sources output through HDMI or component outputs.
Setting the output resolution for HDMI and component video.
Adjusting speaker impedance and type settings.
Specifying connected speakers and crossover frequencies.
Setting crossover frequencies for front speakers.
Setting speaker distances for optimal sound arrival.
Settings for Dolby Pro Logic IIx and IIz modes.
Settings for DTS listening modes.
Settings for Audyssey's room correction and speaker setup.
Adjusting sound quality based on volume levels.
Setting input levels individually for each input selector.
Correcting audio delay between video and audio signals.
Determining the aspect ratio of the picture.
Selecting picture modes for different viewing conditions.
Reducing video signal delay during playback, potentially affecting picture quality.
Specifying output resolution for HDMI and component video.
Sending TV tuner audio signal to HDMI OUT MAIN.
Selecting HDMI IN as the audio input source.
Selecting COAXIAL IN as the audio input source.
Selecting OPTICAL IN as the audio input source.
Configuring volume display, muting level, maximum volume, and power-on volume.
Settings for on-screen display and language selection.
Settings for Zone 2 and Zone 3 outputs and volume control.
Enabling RIHD for controlling connected components via HDMI.
Allowing HDMI signals to pass through to other devices.
Outputting audio signals from the TV through the AV receiver's speakers.
Essential requirements for Ethernet network and router configuration.
Locking setup menus to protect settings.
Ways to connect Zone speakers directly or to an additional amplifier.
Controlling Zone 2/3 using the remote controller.
Muting audio output for Zone 2 and Zone 3.
Setup for using IR receiver in zones with a connecting block.
Using the RI Dock for iPod/iPhone playback and control.
Finding remote control codes via the on-screen menu.
Solutions for the AV receiver failing to power on.
Steps to resolve audio issues like no sound or low volume.
Resolving issues where only front speakers output sound.
Resolving issues with surround speakers not producing sound.
Steps for updating firmware using a wired network connection.
Steps for updating firmware using a USB storage device.
Step-by-step procedure for updating firmware via network.
Overview of different video connection formats supported.
Video signal flow when Monitor Out is set to Main or Sub.
Video signal flow when Monitor Out is set to Analog.
How inputs are selected automatically based on priority.
Linked operations enabled by connecting to a RIHD-compatible TV.
Essential requirements for Ethernet network and router configuration.
Playing digital music files from computers or media servers.
Requirements for USB storage devices.
Detailed specifications for the amplifier section.
Specifications related to video input, output, and resolution.
Specifications for the FM and AM tuner sections.
General specifications including power, dimensions, and weight.
To Next Page
General
