To Next PageTo Next Page
Need help?Do you have a question about the Integra DTR-8.3 and is the answer not in the manual?
General| THD | 0.08% |
|---|---|
| Signal-to-Noise Ratio (Line, IHF-A) | 106 dB |
| Phono Input | Yes |
| Zone 2 Output | Yes |
| Network Connectivity | Yes |
| Frequency Response | 10Hz-100kHz (+1dB, -3dB) |
| Signal to Noise Ratio | 106 dB |
| Input Sensitivity/Impedance | 200mV/47k ohms |
| Video Inputs/Outputs | Component: 3 in / 1 out |
| Multi-room Output | Yes |
| Network Capability | Yes |
| Bluetooth | Yes |
| Wi-Fi | Yes |
Covers reading instructions, heeding warnings, water/moisture, accessories, ventilation, power sources, grounding, cord protection, lightning, power lines, overloading, object entry, servicing.
Covers replacement parts, safety checks, mounting, heat, and liquid hazards.
Covers copyright, fuse, cleaning, power, and general operation.
Details on amplifier, A/V formats, tuner, and other features.
Lists included accessories and guides initial power and remote connections.
Guides battery insertion and explains remote capabilities.
Explains how to use the remote's touchscreen and navigate menus.
Overview of front panel components and their locations.
Explanation of each button's operation on the front panel.
Explaining the symbols and information shown on the front panel display.
Identifies all rear panel connectors and their functions.
Navigating the remote's main screen and selecting devices.
Overview of remote menus and button operations.
Explaining specific button functions across different remote menus.
Best practices for connecting audio and video components.
Instructions for connecting turntables, CD players, tape decks, etc.
Instructions for connecting DVD players, VCRs, and other video devices.
Guidelines for connecting TVs and projectors to the unit.
Instructions for connecting DVD recorders and other video recording equipment.
Connecting satellite receivers, video cameras, and game devices.
Optimal speaker layout, positioning, and recommended configurations.
Basic speaker requirements for surround sound playback.
Instructions for physically connecting speaker cables to terminals.
Setup for the supplied FM indoor and AM loop antennas.
Setup for outdoor antennas and using antenna cable adapters.
Using SURR BACK/ZONE 2 SPEAKER terminals for Zone 2 audio.
Alternative methods for connecting Zone 2 speakers using OUT/PRE OUT terminals.
Setting up an IR receiver to control the unit from a remote location.
Using the unit to control other devices via an IR emitter.
Connecting other Integra/Onkyo components and using power outlets.
Setting up serial communication for external control.
Connecting devices with multi-channel analog output and amplifiers.
Configuring trigger outputs for external devices.
Guides initial power connection and remote control power operation.
Selecting audio/video sources and adjusting overall volume.
Selecting different audio processing modes for enhanced sound.
Switching display, tone control, and using headphones.
Adjusting display brightness, speaker levels, and setting sleep timer.
Selecting audio input modes and setting up multichannel audio.
Manual and auto tuning for radio stations and FM stereo reception.
Saving, recalling, and removing preset radio stations.
Procedures for recording currently played or different source signals.
Recording video from one source with audio from another.
Selecting sources and controlling Zone 2 independently from the main zone.
Controlling the audio levels for Zone 2 speakers.
Overview of the setup menu hierarchy and available settings.
Instructions on how to use the setup menu system with front panel or remote controls.
Configuring speaker impedance to match connected speakers.
Setting surround back speakers and Zone 2 output configurations.
Setting up IR receivers for remote control operation.
Configuring speaker types, sizes, and crossover frequencies.
Measuring distances from speakers to the listening position for calibration.
Adjusting individual speaker volume levels for balanced sound.
Settings for digital input signal types and formats.
Configuring multichannel input and digital signal formats.
Configuring video inputs and customizing input source names.
Setting default listening modes and configuring 12V trigger outputs.
Explanation of various Digital Signal Processing modes.
Adjusting bass, treble, and configuring surround speaker outputs.
Adjusting Re-EQ, upsampling, and A/V synchronization.
Settings for LFE level, mono mode, and Theater-Dimensional mode.
Adjustments for Pro Logic II and DTS Neo:6 surround modes.
Configuration options for THX modes and specific DSP modes.
Volume display, muting level, maximum volume, and power-on volume settings.
Adjusting headphone volume and customizing OSD appearance/position.
Personalizing remote functions like battery, clock, and backlight.
Switching between USE, LEARN, LABEL, ADD, DEL modes.
Switching between different devices controlled by the remote.
Selecting a device brand from a list for remote control.
Choosing specific RC code sets for a selected brand.
Automatic search for matching device brands and RC codes.
Learning IR commands for specific buttons on the remote.
Programming menu items and direct-access/Left/Right buttons.
Renaming buttons and menu entries for easier identification.
Managing device entries in the remote controller.
Creating custom sequences of commands (macros).
Removing buttons, devices, and macros from the remote controller.
Recovering deleted buttons, devices, or macros.
Creating sequences of commands to automate device actions.
Scheduling macros or commands to execute at specific times.
Grouping macros and timers for better management.
Configuring the remote to use Radio Frequency or Infrared signals.
Fine-tuning RF signal settings for multiple devices and channels.
Using ChadEdit software for advanced remote controller customization.
Instructions for using the optional recharging dock.
Answers to frequently asked questions about remote programming and operation.
Guidance on resetting, calibrating, and resolving remote error messages.
Solutions for power issues, no sound, and speaker connection problems.
Common problems with picture, sound, and On-Screen Display (OSD).
Troubleshooting remote display, response, and mode switching issues.
Understanding error messages and resolving mode limitations.
Technical details of the amplifier, tuner, and power output.
Technical details and features of the remote controller.
Using internet radio and network streaming features.
Prerequisites for network functionality, including modem and router setup.
Tuning into stations and saving them as presets.
Accessing and playing music files stored on the Audio Network Server.
Options for random playback, repeat modes, and track selection.
Understanding setup menu structure and network configuration.
Setting IP addresses, proxy servers, and MAC addresses.
Server selection, NTSP port settings, and common network issues.
Common issues and solutions for network audio features.
