Need help?Do you have a question about the Integra DTR-4.6 and is the answer not in the manual?
Details on power output, dynamic power, THD, damping factor, and impedance.
Features like Dolby Digital, DTS, D/A converters, and DSP processing.
Input/output options for video and digital audio signals.
Identification and function of all front panel buttons and indicators.
Details optical, coaxial, component, S-Video, and composite connections.
RS232, IR, 12V Trigger, XM antenna, and RI jacks.
Speaker terminals, subwoofer out, and AC inlet/outlets.
How to select modes for controlling different AV components.
Explains buttons for DVD playback, menus, and setup.
Explains buttons for CD player, MD, and CDR playback and recording.
Explains buttons for controlling HDD-compatible components like iPod docks.
Guidance on positioning front, center, surround, and subwoofer speakers.
Step-by-step guide for connecting video and audio signals to a TV or projector.
Guide for connecting DVD player video and audio to the AV receiver.
Steps to connect VCR or DVD recorder for playback and TV audio.
Guide for connecting VCR or DVD recorder for recording video and audio.
How to connect external video sources like satellite receivers.
Guide for connecting CD player analog or digital audio outputs.
How to connect recorders for playback and digital recording.
How to connect RI components and use auto power, direct change, and remote control.
How to turn the receiver on and put it into standby mode.
Setting subwoofer, speaker size (large/small), and crossover.
Adjusting speaker volume levels using test tones for balanced sound.
Assigning video inputs to selectors and configuring upconversion.
Assigning digital audio inputs (optical/coaxial) to input selectors.
How to choose an input source using the receiver or remote.
Using volume control and selecting listening modes for enjoyment.
How to tune into radio stations manually or automatically.
How to select channels by category or direct search.
How to store favorite AM/FM stations and XM channels.
Setting up multichannel input and subwoofer sensitivity.
Fine-tuning individual speaker volume levels.
How to choose different sound modes via receiver or remote.
Explains Direct, Stereo, Mono, Dolby Pro Logic II, and Dolby Digital modes.
Explains DTS, DTS 96/24, NEO:6, and various Onkyo DSP modes.
How to access and adjust audio settings like tone and levels.
Assigning default listening modes for different signal formats and inputs.
Solutions for receiver not turning on or turning off unexpectedly.
Troubleshooting no sound, quiet sound, or missing speakers.
To Next Page
General
