To Next PageTo Next Page
Need help?Do you have a question about the Integra DTR-40.7 and is the answer not in the manual?
General| Channels | 7.2 |
|---|---|
| THD at Rated Power | 0.08% |
| HDMI Inputs | 6 |
| HDMI Outputs | 2 |
| Audio Return Channel | Yes |
| Dolby Atmos | Yes |
| DTS:X | Yes |
| Zone Output | Zone 2 |
| Network Connectivity | Ethernet, Wi-Fi |
| Bluetooth | Yes |
| Rated Output Power (8 Ohms) | 125 W (8 Ohms, 20 Hz–20 kHz, 0.08% THD, 2 Channels Driven, FTC) |
| Frequency Response | 10 Hz - 100 kHz |
| Signal-to-Noise Ratio | 106 dB |
| Input Sensitivity and Impedance | 200 mV/47 kΩ |
| Speaker Impedance | 4 Ohms–16 Ohms |
| HDMI Support | 4K/60 Hz, HDCP 2.2 |
| HDR Support | HDR10, HLG, Dolby Vision |
| Streaming Services | Spotify, Pandora, Tidal, Deezer, TuneIn |
| Video Inputs/Outputs | Composite, Component |
| Audio Inputs/Outputs | Optical, Coaxial |
| USB | Yes |
Details on connecting speakers for optimal sound field setup.
Crucial warning about connecting speakers with correct impedance to prevent failure.
Guide on connecting the AV receiver to a TV and external players using HDMI.
Details on connecting HDMI cables for video/audio signals and ARC function.
How to connect audio using digital optical or analog cables for TVs without ARC support.
Instructions for connecting components that lack HDMI ports.
Instructions for connecting the unit to a network via Ethernet or Wi-Fi for online services.
Automatic calibration for optimal speaker settings and room acoustics.
Checking network connectivity and configuring Wi-Fi settings.
Detailed steps for placing the microphone and performing automatic speaker calibration.
Steps to check input source connections and set CEC link function.
Fundamental steps for turning on the unit, selecting inputs, and adjusting volume.
Identification and explanation of buttons on the remote controller for operation.
Streaming audio from Apple devices (iPhone, iPod touch, iPad) and PCs with iTunes.
Step-by-step guide to play music from Apple devices using AirPlay.
How to stream music from a computer using iTunes and AirPlay.
Procedure for pairing Bluetooth-enabled devices with the AV receiver for the first time.
How to play music from a connected Bluetooth device, including input switching.
Methods for connecting the unit for multi-zone audio playback.
Connecting to external amplifiers for Zone 2 audio output.
Connecting speakers directly to Zone 2 terminals for multi-zone audio.
Steps for selecting inputs and starting playback in Zone 2.
Procedure to reset the AV receiver to factory default settings.
Detailed specifications for the amplifier's power output, impedance, and frequency response.
Details on HDMI input/output capabilities, including supported resolutions and audio formats.
