Need help?Do you have a question about the Integra DTR-40.3 and is the answer not in the manual?
Overview of the AV receiver's front panel controls and indicators.
Explains the various indicators on the AV receiver's front panel display.
Details the various input and output jacks and terminals on the AV receiver's rear panel.
Instructions on how to use the remote controller to operate the AV receiver.
Guide on how to connect speakers to the AV receiver's terminals.
Details how to configure speaker settings based on the number and type of speakers used.
Explains the process and importance of bi-amping front speakers for improved audio.
Instructions on using the AV receiver as a preamp with an external power amplifier.
General overview of connecting various AV components using different cable types.
Guide on connecting audio/video components using HDMI cables and ports.
Illustrates how to connect various components to the AV receiver's jacks.
Instructions for connecting Integra/Onkyo components using the RI interface for remote control.
Explains how to connect the supplied FM and AM antennas for radio reception.
How to play audio/video from connected source components.
Steps for playing music and video files from an iPod/iPhone connected via USB.
Instructions for playing music files from USB flash drives and MP3 players.
Guide to playing music files stored on a computer or media server via the network.
How to tune into and enjoy AM and FM radio stations using the built-in tuner.
Guide to the automatic speaker setup process using the calibrated microphone.
How to choose different listening modes for various audio sources and content.
Explains speaker activation and selection for different surround sound configurations.
How to set the AV receiver to turn off automatically after a specified period.
How to view details about the current input source, signal format, and resolution.
Overview of the on-screen setup menus for configuring AV receiver settings.
Configuration options for video output via HDMI, S-Video, and composite.
How to assign HDMI inputs to input selectors for proper routing.
Instructions for assigning digital audio inputs (coaxial, optical) to input selectors.
Specifies connected speakers and sets crossover frequencies for optimal sound.
Setting speaker distances to ensure sound arrives at the listener correctly.
Adjusts tone and frequency response for individual speakers using a 15-band equalizer.
Options for selecting audio channels or mono output for stereo sources.
Automatically adjusts volume differences between content and sources for consistent listening.
Configuration options for Audyssey audio processing modes like Dynamic EQ and Dynamic Volume.
Sets individual input level for each source component to match volume differences.
Options to adjust picture quality, aspect ratio, and video settings for optimal viewing.
Sets priority for audio output when digital and analog inputs are present.
Assigns default listening modes to input sources for automatic selection.
Configures the display language for on-screen menus and settings.
Sets or changes the AV receiver's remote ID to avoid interference with other components.
Controls how HDMI signals pass through the AV receiver to connected devices.
Automatically puts the AV receiver into standby mode after a period of inactivity.
Instructions for updating the AV receiver's firmware via network or USB.
Guides on connecting speakers and components for Zone 2 audio playback.
Instructions for playing music, photos, and videos from iPod/iPhone using the Onkyo Dock.
Steps to enter codes to control other AV components with the receiver's remote.
How to teach the AV receiver's remote to mimic commands from other remotes.
Programming sequences of actions into Activities buttons for one-touch operation.
Solutions for problems related to turning the AV receiver on or off.
Steps to resolve issues where no sound or only partial sound is produced.
Solutions for problems related to the display of video signals.
Important considerations for optimal video signal routing and potential issues.
Explains different video connection types and their signal flow through the receiver.
Details various audio connection types and their signal priority.
Explains linked operations between the AV receiver and RIHD-compatible devices.
Explains the HDMI standard, its features, and supported audio/video formats.
Guides on connecting the AV receiver to a home network for Internet radio and streaming.
Technical details and performance metrics for the AV receiver's amplifier section.
To Next Page
General
