Need help?Do you have a question about the Integra DTR-8.4 and is the answer not in the manual?
Specific precautions for models sold in the United States.
Regulatory information regarding FCC compliance and user responsibilities.
Specific precautions for models sold in Canada.
Details on the amplifier's power output, sensitivity, and impedance specifications.
Lists supported audio formats, DSP capabilities, and video input/output options.
Information on tuner presets and automatic tuning features.
Highlights of additional functionalities like OSD, remote control features, and Net-Tune.
Step-by-step guide for inserting batteries into the remote controller.
Instructions on aiming the remote and optimal operating conditions.
Description of buttons, indicators, and the display on the front of the unit.
Detailed explanation of various buttons and functions located on the front panel.
Identification and explanation of all input and output ports on the rear of the unit.
How to use the remote controller to control the DTR-8.4 unit itself.
Instructions for operating Net-Tune features using the remote controller.
How to use the remote controller to operate a connected DVD player.
Instructions for controlling a MiniDisc recorder with the remote.
How to use the remote controller to operate a cassette deck.
Recommendations for connecting speakers for optimal surround sound experience.
Guidance on optimal placement of front, center, surround, and back speakers.
Instructions on using color-coded labels for correct speaker terminal identification.
Step-by-step process for connecting speaker cables to the unit's terminals.
How to connect a powered subwoofer to the DTR-8.4's subwoofer output.
Instructions for setting up the supplied indoor FM antenna.
Guide for connecting the supplied indoor AM loop antenna.
Steps for connecting an external FM antenna and using adapters.
How to connect an external AM antenna for improved reception.
Overview of various video and audio cable types and their corresponding sockets.
Explains different video connection methods for outputting to a TV or projector.
Detailed instructions for connecting DVD players via various video and audio formats.
How to connect players with multichannel analog outputs for DVD-Audio.
Steps to connect a VCR for playing back video and audio through the DTR-8.4.
Guide for connecting a D-VHS VCR for video and audio playback.
Instructions for connecting a VCR for recording signals from the DTR-8.4 or other sources.
How to connect various video sources like TVs, satellite boxes, and LD players.
Guide for connecting camcorders and game consoles to the unit.
How to connect CD players using optical, coaxial, or analog audio connections.
Steps for connecting cassette recorders for audio input and output.
Instructions for connecting digital recorders instead of cassette recorders.
How to connect a turntable, including phono inputs and ground wire connection.
How to connect an external power amplifier to the DTR-8.4 for increased power.
Information on using the Remote Interactive (RI) system to control other components.
How to use the unit's AC outlets to power other AV components.
Instructions for connecting the main power cord to the unit and wall outlet.
How to power on the unit using the front panel button or the remote controller.
Explanation of the OSD system for configuring the DTR-8.4.
How to configure speaker impedance settings for optimal performance.
Guide on specifying speaker sizes (large/small) and subwoofer presence.
How to select crossover frequencies based on speaker size for subwoofer integration.
How to measure and input speaker distances for accurate sound staging.
Procedure for adjusting individual speaker volumes using the test tone.
How to assign digital audio inputs to specific input sources for proper signal routing.
Configuring the digital input format (PCM, Dolby, DTS) for each source.
Assigning composite and S-Video inputs to specific input sources for video signal routing.
Assigning component video inputs to specific sources for high-quality video transmission.
Specifying the location of an IR receiver for remote control operation.
How to change the remote controller ID to avoid interference with other components.
Steps to modify the remote controller's ID for multi-component environments.
Setting the TV system format (PAL/NTSC) for regions outside North America.
Adjusting the input source display label for specific recorder compatibility.
Guide on choosing which connected AV component to listen to or watch.
How to temporarily mute the audio output of the DTR-8.4.
Setting the unit to automatically turn off after a specified period.
Adjusting the brightness level of the unit's front panel display.
Connecting headphones for private listening and their operational modes.
Configuring the signal format (analog, digital, multichannel) for each input source.
Specifying accepted digital formats (DTS, PCM) for each digital input.
How to tune into AM and FM radio stations using the built-in tuner.
Methods for manually tuning and automatically scanning for radio stations.
Steps to store favorite radio stations as presets for quick access.
How to choose previously stored radio presets.
Process for removing stored radio presets.
Explains various surround sound and DSP listening modes available.
Details on various digital signal processing modes like Orchestra, Studio-Mix, etc.
How to choose appropriate listening modes for different audio sources and speaker setups.
Explains how to utilize Dolby Digital, DTS, and THX surround modes effectively.
How to view details about the current input source and its signal format.
How to fine-tune the volume level for each speaker individually.
Correcting harsh high-frequency content in soundtracks for better theater playback.
Reducing dynamic range for late-night listening without disturbing others.
How to connect and utilize multichannel analog audio inputs for advanced audio formats.
Choosing the specific input source for multichannel audio playback.
Fine-tuning speaker volumes when using the multichannel input.
Explains how to record audio and video from various sources.
Steps for recording the currently active input signal.
How to record one source while listening to another.
Techniques for dubbing audio from one source onto video recordings from another.
Automatically selecting listening modes based on the input source.
How to link trigger outputs to specific input sources for automated component control.
Overview of settings for tailoring audio and listening mode characteristics.
Adjusting bass and treble levels for individual speakers.
Configuring surround speaker usage for different audio formats.
Settings for sound effects like Re-EQ, Upsampling, and Double Bass.
Adjusting A/V sync and relative speaker delays for optimal audio-video alignment.
Adjusting the subwoofer's LFE channel volume for Dolby Digital and DTS sources.
Settings for mono playback, including Academy Filter and channel handling.
Configuring settings for the Theater-Dimensional listening mode.
Settings for default surround modes based on analog/PCM and digital input signals.
Configuration options for THX listening modes, including decoder and effect settings.
Settings for various DSP listening modes, including front effects and reverb levels.
Customizing general preferences like volume display, muting level, and power-on volume.
Options for volume display mode, muting level, maximum volume, and power-on volume.
Adjusting headphone volume relative to the main volume output.
Customizing onscreen display settings like background color and immediate display.
Adjusting the position of onscreen setup menus on the display.
How to assign custom names to radio presets and input sources.
Setting input levels for individual sources to ensure consistent volume.
Introduction to Net-Tune client functionality for network audio and internet radio.
Details on necessary Ethernet and internet connection configurations for Net-Tune.
Diagrams and instructions for connecting the unit to an Ethernet network.
How to tune into and select stations from Internet radio services.
Storing favorite internet radio stations as presets for quick selection.
How to access and play previously stored internet radio presets.
Process for removing unwanted internet radio presets.
How to select and play music files stored on a network audio server.
Using the first letter to quickly find music items on the server.
Playing a random selection of tracks from the server.
Setting tracks to play repeatedly (single track or entire list).
How to select a network audio server and configure track information display.
Manually configuring network settings like IP address, proxy, and client setup.
Setting IP address, subnet mask, gateway, and DNS server manually.
Configuring proxy server settings for internet radio access.
Viewing the unit's MAC address.
Checking client name and configuring Wakeup on LAN and NTSP port settings.
Explains different methods for setting up Zone 2 audio playback.
Connecting Zone 2 audio via a receiver/integrated amp.
Connecting Zone 2 audio through an external power amplifier.
Connecting Zone 2 speakers directly to the DTR-8.4.
How the 12V trigger output controls Zone 2 components.
Connecting the DTR-8.4 to a multiroom system for Zone 2 control.
Using a multiroom kit to control the unit when installed in a cabinet.
Using an IR emitter to control other components via Zone 2.
Configuring the surround back terminals for either surround back or Zone 2 use.
How to turn on, select sources, and adjust volume for Zone 2 operation.
Steps to program the remote to control other AV devices using codes.
Specific remote control codes for controlling Integra/Onkyo DVD players.
Comprehensive list of remote control codes for various brands of DVD players, VCRs, etc.
How to use the remote controller to operate a satellite receiver.
Instructions for controlling a VCR with the DTR-8.4 remote.
How to use the remote controller to operate a television.
Instructions for operating a cable receiver with the remote.
How to teach the DTR-8.4 remote new commands from other remotes.
Programming sequences of actions (macros) for single-button execution.
Guide on creating custom macros with multiple actions.
How to execute programmed macros.
Assigning custom names to created macros.
How to add support for new types of components to the remote.
Changing the sequence in which remote controller modes appear.
Removing unwanted modes for components not in use.
Associating specific remote modes with input sources.
Switching between infrared (IR) and radio frequency (RF) signal transmission.
Restoring the remote controller to its original factory default settings.
Solutions for problems related to the unit not turning on or shutting off unexpectedly.
Troubleshooting steps for no sound, low volume, or incorrect speaker output.
Diagnosing issues where only specific speakers produce sound.
Resolving problems related to specific signal formats or unavailable listening modes.
Troubleshooting no picture, incorrect OSD display, or poor reception.
Solutions for a non-functional remote controller, including battery and obstruction checks.
Problems controlling other components or learning commands for the remote.
Troubleshooting problems related to recording audio and video.
Solutions for Zone 2 operation problems and Net-Tune connectivity or playback errors.
Problems with headphone sound, changing settings, or audio adjust functions.
Explanations of error messages and how to perform a system reset.
Technical details of the amplifier's performance, sensitivity, and impedance.
Technical data for the FM and AM tuner performance.
Details on power supply, dimensions, weight, and connectivity options.
Lists of video and audio input/output types, digital interfaces, and pre-outs.
To Next Page
General
