EasyManua.ls Logo

Integra DTR-6.2 User Manual

Integra DTR-6.2
64 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Contents
Thank you for purchasing the AV Receiver.
Please read this manual thoroughly before making
connections and plugging in the unit. Following the
instructions in this manual will enable you to obtain
optimum performance and listening enjoyment
from your new AV Receiver. Please retain this
manual for future reference.
DTR-6.2
AV Receiver
Instruction Manual
Appendix 61
Remote controller 46
Setup and operation 24
Before using 2
Facilities and connections 8

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Integra DTR-6.2 and is the answer not in the manual?

Integra DTR-6.2 Specifications

General IconGeneral
HDMI Outputs1
Power Output100 W per channel (8 ohms)
Audio Formats SupportedDolby TrueHD, DTS-HD Master Audio, Dolby Digital Plus
Network ConnectivityEthernet
Streaming ServicesSpotify, Pandora, Tidal
Weight22.5 lbs
Tuning rangeFM
Frequency response10 Hz - 100 kHz
Total harmonic distortion0.08%
Damping factor60
Input sensitivity200mV (line)
Signal to noise ratio100 dB
Speaker load impedance4Ω to 16Ω
Digital inputscoaxial, optical
Video ConnectionsComposite, Component
Dimensions (W x H x D)435 x 174 x 431mm
HDMI Version2.0
Input Sensitivity/Impedance200 mV/47 kΩ

Summary

Important Safeguards

Features

Before using this unit

Using the remote controller

Guide on pointing the remote and operational notes for proper signal reception.

Front panel facilities

Remote controller

Connections

Connecting speakers

Speaker setup

Speaker Configuration submenu

Sets which speakers are connected and their size (front, center, surround, subwoofer).

Speaker Distance submenu

Enters the distance from each speaker to the listening position for sound space timing.

Level Calibration submenu

Adjusts individual speaker volume levels to match for balanced sound output.

Setup menus

Navigating through the Setup menu

Instructions on using the remote controller or front panel buttons to access menu settings.

Using remote controller

Learning a pre-programming code

Operating your programmed remote controller

Programming the commands of remote controllers for other devices into the remote controller

Troubleshooting guide

Related product manuals