Need help?Do you have a question about the Integra DTR-6.8 and is the answer not in the manual?
General| Component Video Outputs | 1 |
|---|---|
| Digital Audio Inputs (Optical) | 2 |
| Digital Audio Inputs (Coaxial) | 2 |
| Total Harmonic Distortion | 0.08% |
| Input Sensitivity | 200 mV |
| Input Impedance | 47 kΩ |
| Video Outputs | 2 |
| Audio Outputs | 2 |
Details on various input and output ports for connecting components.
Description of controls and indicators on the front of the AV receiver.
Description of input/output terminals located on the back of the AV receiver.
Step-by-step guide for inserting batteries into the remote control.
Explanation of different modes for controlling various AV components with the remote.
Instructions on how to connect speakers for optimal surround sound experience.
Detailed steps on how to properly connect speaker cables to the terminals.
Guide for connecting the AV receiver to a display device like a TV or projector.
Information on using the HDMI interface for high-definition audio and video connections.
Essential initial configuration steps for optimal performance.
How to navigate and utilize the AV receiver's onscreen setup menus.
Automated system for optimizing speaker settings based on room acoustics.
Explains common error messages during automatic speaker setup and how to resolve them.
How to choose and switch between different connected audio/video sources.
How to modify bass and treble levels for the front speakers.
Temporarily turn off the audio output of the AV receiver.
Instructions on connecting and using headphones for private listening.
Instructions on how to tune into radio stations using auto or manual modes.
Information and setup for receiving XM Satellite Radio service.
Information and setup for receiving SIRIUS Satellite Radio service.
How to store favorite radio stations for quick access.
How to choose different listening modes based on the source material.
Detailed explanations of various sound modes available on the receiver.
Guide on how to record audio and video from different sources simultaneously.
Adjusting the volume of each speaker for optimal sound balance.
Configuration options for connected speakers, including size and crossover.
Setting speaker distances for accurate sound staging and timing.
Adjusting individual speaker volumes for balanced sound output.
Adjusting tone controls, multiplex/mono settings, and other audio parameters.
Adjusting audio delay to fix sync issues between sound and video.
Configuring HDMI related settings for optimal audio/video transmission.
How to connect speakers and amplifiers for Zone 2 operation.
Enabling or disabling power to Zone 2 speakers.
How to control the volume for the Zone 2 audio output.
How to program the remote to control components from other manufacturers.
Allows the remote to learn commands from original remotes.
Programming sequences of commands for single-button execution.
Technical details on power output, frequency response, and distortion.
General specifications including power supply, dimensions, and weight.
Steps to resolve issues when the receiver does not power on.
Troubleshooting steps for audio output problems.
Steps to resolve issues with the remote control's functionality.
To Next Page
