Integra DTR-6.8 User Manual

48
First Time Setup—Continued
If you connect an -capable Onkyo MiniDisc
recorder, CD recorder, or RI Dock to the TAPE IN/OUT
or GAME/TV IN jacks, for to work properly, you
must change this setting.
This setting can only be changed on the AV receiver.
iPod photo: If you’re using an iPod photo with the RI
Dock, connect the RI Dock to the GAME/TV IN jacks.
Note:
Dock can be selected for the Tape input selector or
Game/TV input selector, but not both at the same time.
Changing the Input Display
1
Press the [Tape] or [Game/TV]
input selector button so that
“TAPE” or “GAME/TV” appears
on the display.
2
Press and hold down the [Tape]
or [Game/TV] input selector but-
ton (about 3 seconds) to change
the setting.
Repeat this step to select MD, CDR, or
Dock.
For the Tape input selector, the setting
changes in this order:
TAPE
→ MD → CDR → DOCK
For the Game/TV input selector, the
setting changes in this order:
Game/TV
↔ DOCK
1, 2
1, 2
or
or
→
DTR-6.8_En.book Page 48 Wednesday, June 20, 2007 4:16 PM

Integra DTR-6.8 Specifications

General

Component Video Outputs	1
Digital Audio Inputs (Optical)	2
Digital Audio Inputs (Coaxial)	2
Total Harmonic Distortion	0.08%
Input Sensitivity	200 mV
Input Impedance	47 kΩ
Video Outputs	2
Audio Outputs	2