Need help?Do you have a question about the Integra DTR-6.9 and is the answer not in the manual?
General| Channels | 7.1 |
|---|---|
| HDMI Inputs | 3 |
| HDMI Outputs | 1 |
| Network Connectivity | No |
| Component Video Inputs | 3 |
| Component Video Outputs | 1 |
| Digital Audio Inputs (Optical) | 2 |
| Digital Audio Inputs (Coaxial) | 2 |
| Total Harmonic Distortion | 0.08% |
| Power Output | 100 W/Ch (8 Ohms, 20 Hz-20 kHz, 0.08% THD, 2 Channels Driven) |
| Audio Formats Supported | Dolby TrueHD, DTS-HD Master Audio |
| Signal to Noise Ratio | 106 dB |
| Frequency Response | 10 Hz - 100 kHz (+1 dB, -3 dB) |
| Input Sensitivity/Impedance | 200 mV/47 kOhms (Line) |
| Video Inputs/Outputs (Composite) | 5 In / 2 Out |
| Video Inputs/Outputs (Component) | 3 In / 1 Out |
| Audio Inputs/Outputs (Phono) | 1 Input |
| Audio Inputs/Outputs (Digital Optical) | 2 In |
| Audio Inputs/Outputs (Digital Coaxial) | 2 In |
| Dimensions (W x H x D) | 435 x 174 x 435 mm |
Conditions under which the apparatus requires servicing by qualified personnel.
Precautions to prevent objects or liquids from entering the apparatus.
Diagram and labels for the front panel controls and indicators.
Detailed explanation of front panel buttons, indicators, jacks, and display elements.
Diagram illustrating the rear panel connections and ports.
Detailed description of all rear panel input and output connectors.
Guidance on aiming the remote and factors affecting its performance.
Detailed explanation of the remote's buttons for controlling the AV receiver and tuner.
Details on speaker configuration, dipole speakers, subwoofer, and cable labeling.
Details on HDMI technology, supported audio, and copyright protection.
Using the microphone to automatically configure speaker settings and room acoustics.
Troubleshooting common error messages like ambient noise or speaker detection errors.
How to choose sources, start playback, and adjust the receiver's volume.
Selecting AM/FM, tuning methods (Auto, Manual, Frequency), and weak signal tips.
Information on XM radio, subscription, legal details, and connecting the Mini-Tuner.
Explains common messages like antenna errors, unauthorized channels, and signal issues.
Explains common messages like acquiring signal, antenna errors, and invalid channels.
General methods for recording selected input sources and separate AV sources.
How to select listening modes using the AV receiver or remote controller.
Detailed explanation of THX Cinema, Music, Games, Select2, and Surround EX modes.
Reference table detailing available listening modes for Analog and PCM sources.
Reference table detailing available listening modes for Dolby Digital and Dolby Digital Plus sources.
Reference table detailing available listening modes for DTS sources.
Reference table detailing available listening modes for TrueHD sources.
Reference table detailing available listening modes for DTS-HD sources.
Reference table detailing available listening modes for DTS Express and DSD sources.
Checking and manually setting speaker parameters like type, configuration, and crossover.
Adjusting individual speaker volume levels using built-in test tones for balanced sound.
Configuring THX settings: Surround Back Spacing, Subwoofer, BGC, and Loudness Plus.
Settings for Multiplex/Mono modes and PLIIx/Neo:6 Music mode adjustments.
Detailed settings for audio adjustments including Dimension, Center Width, Neo:6, Dolby EX, T-D, DSD, and LFE levels.
Using the Audio button for tone controls, Late Night function, and Re-EQ function.
Settings for Audyssey Dynamic EQ, Music Optimizer, speaker level calibration, and A/V sync adjustment.
Setting default listening modes for each input source and signal format.
Correcting audio/video sync and entering custom names for inputs/presets.
Adjusting picture quality via modes, brightness, contrast, hue, saturation, edge enhancement, and noise reduction.
Configuring volume display, muting, maximum volume, power-on volume, and headphone level.
Configuration for Remote ID, Zone 2, Tuner (AM freq, SAT mode, antenna aiming).
Configuring SIRIUS parental lock, analog multichannel sensitivity, and HDMI output resolution/zoom.
Configuring automatic audio input selection and setting digital input signal formats.
Activating the receiver's powered Zone 2 speakers and notes on limitations.
How to learn new commands and delete learned commands from the remote controller.
Programming, running, and deleting macros for automating remote control actions.
Troubleshooting steps for power-on problems, AV receiver turning off, and no/low audio output.
Troubleshooting remote controller functionality and controlling other components.
To Next Page
