Need help?Do you have a question about the Integra DTR-7.8 and is the answer not in the manual?
General| Number of Channels | 7.1 |
|---|---|
| HDMI Outputs | 2 |
| Network Connectivity | Ethernet |
| Room Calibration | Audyssey MultEQ XT |
| Component Video Inputs | 3 |
| Digital Audio Inputs | 3 Optical, 3 Coaxial |
| Signal-to-Noise Ratio | 110 dB (Line, IHF-A) |
| HDMI Version | v1.3a |
| Audio Formats Supported | DTS-HD Master Audio, Dolby TrueHD, Dolby Digital Plus |
| Streaming Services | Pandora |
| THX Certified | Yes |
| iPod Connectivity | Optional Dock Available |
| Frequency Response | 5 Hz - 100 kHz |
| Input Sensitivity/Impedance | 200mV/47k ohms |
| HDMI Inputs | 6 (1 on front panel) |
General guidelines for safe operation and maintenance of the apparatus.
Covers damage requiring service, object/liquid entry, batteries, and ventilation requirements.
Covers copyright, AC fuse, care, cleaning, power, and handling advice.
FCC and IC compliance statements for U.S. and Canadian models.
British model plug replacement, wire coding, fuse, and European conformity.
Details amplifier, processing, audio/video, tuner, and other features of the AV receiver.
Explains THX Ultra2 benefits and product copyright protection technology.
Lists all accessories provided with the AV receiver, such as remote, cables, and microphone.
Explains the use of three speaker systems for main room, Zone 2, and Zone 3, with different sources.
Identifies and describes the controls and indicators on the AV receiver's front panel.
Continues the explanation of front panel buttons and their functions.
Details the various indicators shown on the AV receiver's display screen.
Identifies and describes all the input and output terminals on the rear panel.
Continues the explanation of rear panel connectors and their uses.
Instructions for inserting batteries and notes on remote controller operation and limitations.
Details the different operating modes for controlling various components.
Explains the functions of individual buttons on the remote controller.
Describes how to use the remote controller to operate a DVD player.
Explains the remote controller's functions for CD, MD, and CDR devices.
Details how to use the remote controller to operate an iPod via an RI Dock.
Guidance on positioning front, center, surround, and back speakers for optimal home theater sound.
Details speaker setup, dipole speaker usage, subwoofer connection, and label attachment.
Important precautions for speaker wiring and steps for connecting speaker cables.
Instructions for bi-amping front speakers, including connections and important notes.
Instructions for connecting supplied indoor FM and AM antennas.
Guidance on connecting outdoor FM/AM antennas and using an antenna splitter.
Explains AV connection principles, color coding, and types of AV cables.
Details AV signal flow and helps users select appropriate connection formats.
Explains video signal flow based on HDMI setting and outlines audio connection formats.
Step-by-step guide for connecting video and audio signals from a TV or projector.
Instructions for connecting a DVD player, including video and audio hookup.
Guide for connecting multichannel analog audio sources, like DVD-Audio/SACD players.
Steps for connecting a VCR or DVR for audio and video playback.
Instructions for connecting a VCR or DVR for recording audio and video signals.
Guide for connecting satellite, cable, or terrestrial set-top boxes for audio and video.
Explains HDMI technology, supported audio formats, and copyright protection.
Steps and considerations for connecting components via HDMI, including video and audio signals.
Instructions for connecting game consoles, covering video and audio connections.
Guide for connecting camcorders or other AV components using video and audio inputs.
Instructions for connecting CD players and turntables, including audio and digital connections.
Steps for connecting cassette decks, CDRs, MD recorders, DAT recorders, and power amplifiers.
Guides for connecting RI Docks and other components' power cords.
Instructions for connecting Integra/Onkyo components via RI and connecting the main power cord.
Guide to turning the receiver on/off and essential initial setup procedures.
Instructions for configuring speaker settings like impedance and type.
Guide to setting up the HDMI monitor option for video signal output.
Steps for assigning HDMI inputs to specific input selectors for proper operation.
Further steps for configuring HDMI input assignments and signal handling.
Instructions for assigning component video inputs to input selectors and video upconversion.
How to change input display names for Tape, Game/TV, and other devices for clarity.
Steps for assigning digital audio inputs (coaxial, optical) to input selectors.
Guide for assigning analog audio inputs, including multichannel, to input selectors.
Introduction to Audyssey MultEQ XT for automatic speaker setup and measurement positions.
Detailed steps for performing the automatic speaker detection and measurement process.
Final steps for speaker setup, saving results, and common error messages encountered.
Explains common errors like speaker detection failure and writing errors during setup.
How to review automatic setup results and manually adjust speaker settings, including subwoofer use.
Setting the correct TV format for proper OSD menu display in non-North American regions.
Setting the AM frequency step for proper AM tuning and preset functionality.
Guide to basic operations like selecting sources, adjusting volume, and choosing listening modes.
Instructions for tuning into AM/FM stations using auto or manual modes.
How to tune directly to stations by frequency and display radio information.
Explanation of RDS (Radio Data System), its information types, and program type search.
How to display radio text, search stations by program type, and listen to traffic news.
Connecting XM Mini-Tuner, setting satellite radio mode, and important information.
Guide to selecting XM channels, signing up for the service, and positioning the antenna.
Explains XM channel search, category search, direct tuning, and SIRIUS signup process.
How to display SIRIUS information and position the antenna for optimal signal.
Explains various messages displayed during XM and SIRIUS satellite radio operation.
Details SIRIUS Satellite Radio, its information, warning, and home tuner setup.
How to set the satellite radio mode to SIRIUS and select channels.
Steps for signing up for SIRIUS and selecting channels via search or direct tuning.
How to set up parental lock for channels and select previous channels.
Procedure for changing the PIN number used for parental lock features.
How to display SIRIUS information and position the antenna for optimal signal.
Explains various messages that may appear during SIRIUS satellite radio operation.
Instructions for storing, selecting, and deleting AM, FM, XM, and SIRIUS radio presets.
How to adjust display brightness, individual speaker levels, and mute the receiver.
Explains how to use the sleep timer, connect headphones, and display source information.
How to select audio inputs and specify digital signal formats (PCM, DTS, Auto).
How to select listening modes using the receiver or remote controller.
A table showing which listening modes are available for various source formats.
Details listening modes for DSD, Dolby Digital, and Dolby Digital Plus sources.
Details listening modes available for TrueHD and DTS sources.
Details listening modes available for DTS-HD High Resolution and Master Audio sources.
Explains various listening modes like Direct, Stereo, Mono, Dolby, DTS, and THX.
Describes advanced modes like DTS-HD MA, Neural THX, THX, and Onkyo DSP modes.
How to record input sources and overdub audio/video from different AV sources.
Provides a map illustrating the organization of the AV receiver's setup menus and submenus.
How to use the Re-EQ function for harsh soundtracks and Late Night for quiet listening.
How to adjust audio settings like bass, treble, and tone controls for different speakers.
Explains settings for Direct mode, multiplex/mono sources, and PLIIx/Neo:6 audio enhancements.
Details Dolby EX settings, Theater-Dimensional angle, LFE levels, and listening mode presets.
Explains basic speaker setup and how to configure connected speakers and crossover frequencies.
How to set the LFE low-pass filter frequency and enable double bass for enhanced bass output.
How to specify the distance of each speaker from the listening position for accurate sound staging.
How to adjust speaker levels using test tones for balanced sound output.
How to manually adjust speaker tone using a 15-band equalizer for customized sound.
Configuration options for THX audio, including surround back speaker spacing and subwoofer settings.
How to set up individual input selectors for various AV components.
Adjusting input levels, audio/video sync, and customizing input selector names.
Configuration for satellite radio options and setting up parental lock for channels.
Settings for volume display, muting level, maximum volume, and power on volume.
Configuration for power-on volume, headphone level, zone limits, OSD display, and 12V triggers.
Settings for remote ID, controller ID, and Zone 2/3 configurations.
Configuration for tuner settings, subwoofer sensitivity, and HDMI audio, sync, xvYCC, and control options.
Settings for TV control via HDMI, network configurations, and locking setup menus.
Explains two methods for connecting Zone 2 speakers directly or via an amplifier.
Details Zone 2 video outputs and how to connect Zone 3 speakers and subwoofer.
How to set the Powered Zone 2 feature to activate Zone 2 speakers and its effect on surround back speakers.
How to set Zone 2/3 output to Fixed or Variable and general usage of Zones.
How to select input sources for zones and procedures for turning zones off.
How to adjust volume, balance, mute, and tone settings for Zone 2 and Zone 3.
How to use 12V triggers to automatically activate connected components and manage delays.
Using remote controllers in zones and setting up multiroom kits with IR emitters/receivers.
How to enter remote control codes to operate other AV components with the receiver's remote.
Specific remote codes for Integra/Onkyo components and procedures for resetting remote modes and the controller.
Button functions for controlling TVs, VCRs, and satellite/cable receivers with the remote.
How to teach the remote controller new commands from other devices.
How to create, run, and delete macros for automating sequences of actions.
Troubleshooting steps for power-on problems, no sound, quiet sound, and speaker-specific sound issues.
Troubleshooting steps for picture distortion, poor reception, remote problems, and video/menu display issues.
Solutions for recording problems, headphone sound, DTS signal issues, and HDMI audio/video problems.
Technical specifications for the amplifier section, including power output and distortion.
Technical specs for video inputs/outputs, audio inputs/outputs, and control terminals.
Technical specs for FM/AM tuners, power supply, dimensions, weight, and general features.
To Next Page
