To Next PageTo Next PageWhy is there no sound or very quiet sound on my Integra DTR-20.7?
If there is no sound or the sound is very quiet, ensure that you have selected the correct input for your player and that muting is not enabled.
How to fix out of sync video and audio on Integra Receiver?
If the video and audio are out of sync, it might be because the video is delayed relative to the audio, depending on your TV's settings and connections. You can adjust this in 'Step 3: Before starting the procedure Playing Back', '7 Quick Setup Menu', 'A/V Sync'.
What to do if there is no picture on my Integra DTR-20.7 Receiver?
If there is no picture, ensure that you have selected the correct input. To display video from the connected player on the TV screen, while holding down CBL/SAT on the main unit, press zOn/Standby on the main unit.
How to fix blurry or unclear TV image on Integra Receiver?
If the TV image is blurry or unclear, it is possible that the power cord or connection cables of the unit may have interfered. In that case, keep distance between TV antenna cable and cables of the unit.
General| Audio Channels | 7.2 |
|---|---|
| Network Connectivity | Ethernet, Wi-Fi |
| 3D Support | Yes |
| Streaming Services | Pandora, Spotify |
| 4K Support | Yes |
| Total Harmonic Distortion | 0.08% |
| Input Sensitivity/Impedance | 200 mV/47 kΩ (Line) |
| Signal-to-Noise Ratio | 106dB |
| Speaker Impedance | 4 Ohms – 16 Ohms |
| Video Inputs/Outputs | Component: 1 in / 1 out |
| Digital Audio Inputs | Optical: 2 In |
| Dimensions (W x H x D) | 435 x 173 mm |
Details speaker layout, types, and Dolby Atmos configurations.
Provides guidance on connecting speaker cables and using banana plugs.
Explains HDMI connections for TV and source devices, including ARC.
Guides on connecting non-HDMI audio/video components using analog or digital cables.
Covers AM/FM antenna, network, headphones, and power cord connections.
Automatic speaker setup for optimizing room acoustics and sound.
Verifies input source connections and configures HDMI link functions.
Configures the unit's remote to control other AV components.
Guides through Wi-Fi or wired network setup and connection.
Outlines fundamental playback controls and remote usage.
Identifies and explains the functions of each button on the remote.
Details playback of Internet radio, DLNA, and AirPlay sources.
Explains pairing and playing music wirelessly from Bluetooth devices.
Describes tuning and registering AM/FM radio stations.
Allows audio playback in a separate room (Zone 2).
Provides access to common settings for sound and playback on-screen.
Covers sound adjustments, input format display, and playing separate sources.
Details power output, impedance, frequency response, and tone control characteristics.
Lists Ethernet LAN and Wireless LAN specifications.
Covers communication system, profiles, and supported codecs.
Includes power supply, consumption, dimensions, and weight.
Lists HDMI input/output formats, resolutions, and features.
Specifies Component and Composite video input details.
Details Digital and Analog audio input connections.
Lists Zone 2, Subwoofer, and Speaker output specifications.
Lists connections for Front, Center, Surround, Back/Height, and Zone2 speakers.
Presents a table of supported image formats and resolutions.
Details HDMI resolution, frame rate, color depth and protection technology.
Statement of compliance with EU standards for European models.
Illustrates the correct angle and distance for using the remote controller.
