Need help?Do you have a question about the Integra DTR-7.9 and is the answer not in the manual?
General| Channels | 7.1 |
|---|---|
| HDMI Outputs | 1 |
| Multi-Room Capability | Yes |
| Component Video Inputs | 3 |
| Component Video Outputs | 1 |
| Digital Audio Inputs (Optical) | 2 |
| Digital Audio Inputs (Coaxial) | 2 |
| Analog Audio Inputs | 7 |
| Amplifier Type | Discrete |
| Frequency Response | 5 Hz - 100 kHz |
| Signal-to-Noise Ratio | 106 dB |
| USB Port | No |
| Bluetooth | No |
| Audio Formats Supported | Dolby TrueHD, DTS-HD Master Audio |
| THX Certified | Yes |
| Total Harmonic Distortion | 0.08% |
| Input Sensitivity | 200 mV/47 k-ohms |
| Audio Inputs | 7 Analog |
| Dimensions | 435 x 194 x 435 mm |
| Power Output | 110 Watts per channel into 8 Ohms, 20 Hz - 20 kHz, 0.08% THD, 2 channels driven; 140 Watts per channel into 6 Ohms, 1 kHz, 1 channel driven |
Provides essential guidelines for safe operation, cleaning, and maintenance of the apparatus.
Outlines conditions under which the apparatus requires professional servicing.
Warns against inserting objects or liquids into unit openings to prevent hazards.
Crucial advice on power connection, handling with wet hands, and general unit handling.
Details on power output, amplifier technology, and high current power supply.
Information on THX certification, HDMI video upscaling, and audio formats.
Lists available HDMI, digital, analog, and other connection ports.
Detailed descriptions of buttons and jacks on the front panel.
Detailed descriptions of all input and output jacks on the rear panel.
How to use the remote to operate the AV receiver's main functions.
Covers speaker configuration, subwoofer, labels, dipole speakers, precautions, and cables.
How to power the AV receiver on, put it in standby, and turn it off.
Essential initial setup steps for optimal performance and user experience.
Using the supplied microphone for automatic speaker calibration and room EQ.
Troubleshooting common errors encountered during the automatic speaker setup process.
How to choose the audio/video source to listen to or watch.
Guidance on antenna placement for optimal SIRIUS signal reception.
Setting up a PIN to lock or unlock SIRIUS channels.
Explanation of THX Cinema, Music, Games, Ultra2, and Surround EX modes.
Setting speaker configurations, crossover frequencies, and bi-amping.
Setting subwoofer, front, center, surround, and surround back speaker parameters.
Measuring and setting the distance of each speaker from the listening position.
Adjusting the volume of each speaker using a built-in test tone.
Configuring THX settings like surround back spacing and loudness plus.
Calibrating speaker volume levels and synchronizing audio/video signals.
Setting default listening modes for each input source automatically.
Turning Zone 2 on/off and selecting sources via receiver or remote.
Controlling volume, muting, bass, treble, and balance for Zone 2.
How to enter custom remote control codes for controlling components.
How to operate your TV using the AV receiver's remote controller.
Using the remote to operate DVD players and recorders.
How to control VCRs and PVRs using the AV receiver's remote.
Using the remote to operate satellite or cable receivers.
How to operate CD players, recorders, and MD players with the remote.
Operating an RI Dock for iPod control via the remote controller.
How to operate a cassette recorder using the AV receiver's remote.
Teaching the remote to learn commands from other infrared controllers.
Programming, running, and deleting macro sequences for remote control automation.
Solutions for problems with turning the receiver on or it turning off unexpectedly.
Troubleshooting steps for lack of sound or very quiet audio output.
Diagnosing problems with center, surround back, subwoofer, or front speaker sound.
Troubleshooting sound issues related to signal formats and playback.
Addressing issues with audio sync, picture clarity, and HDMI input.
Resolving problems with video output, onscreen menus, picture distortion, and display.
Troubleshooting remote control operation and controlling other components.
Solving reception problems and remote controller malfunctions.
Notes on improving picture quality with various video source connections.
To Next Page
