Need help?Do you have a question about the Integra DTR-7.7 and is the answer not in the manual?
General| Weight | 18.4 kg |
|---|---|
| Amplifier Type | Discrete |
| Audio Formats Supported | Dolby Digital, DTS |
| THX Certified | No |
| Power Output (8 ohms, 20Hz-20kHz, 0.08% THD) | 110W per channel |
| Total Harmonic Distortion | 0.08% |
| Input Sensitivity | 200mV |
| Dimensions | 435 x 174 x 431 mm |
Instructions on how to operate the remote control sensor and its limitations.
Explains the benefits of surround sound and speaker setup for home theater.
General advice on making AV connections and color coding.
Explains simultaneous audio/video switching by input source.
Guides on connecting a TV or projector via video and audio connections.
Instructions for connecting a DVD player using various video and audio options.
Connects multichannel analog audio from DVD players to the receiver.
Connects VCR/DVD recorders for playback and TV tuner audio.
Guides on connecting VCR/DVD recorders for recording video and audio signals.
Connects satellite/cable receivers and other video sources to the AV receiver.
Explains HDMI interface, audio formats, and copyright protection.
Details the steps for making HDMI cable connections and signal flow.
Guides on connecting camcorders, game consoles, and other devices.
Instructions for connecting a CD player using analog or digital audio.
Instructions for connecting audio recorders like cassette decks and MD recorders.
Guides on connecting HDD components like the RI Dock.
Guides on connecting turntables, including MM/MC cartridges and ground wires.
Explains how to turn the AV receiver on, off, and put it into standby mode.
Guides on using the microphone for automatic speaker configuration and testing.
Explains how to review results from automatic speaker setup and manual adjustments.
Guides on assigning HDMI inputs to input selectors for video components.
Guides on assigning component video inputs to input selectors.
Guides on assigning digital audio inputs to input selectors.
Instructions for setting up and listening to XM Satellite Radio.
Explains checking and manually setting speaker configurations.
Specifies the distance from each speaker to the listening position.
Adjusts individual speaker levels for consistent sound at the listening position.
Solutions for power-related issues like not turning on or shutting off.
Troubleshooting steps for audio issues like no sound or distorted sound.
To Next Page
