To Next PageTo Next Page
Need help?Do you have a question about the Integra DTR-7.2 and is the answer not in the manual?
General| Channels | 7.2 |
|---|---|
| HDMI Inputs | 6 |
| HDMI Outputs | 2 |
| Speaker Impedance | 4 - 16 ohms |
| Digital Outputs | 1 Optical |
| Power Output | 110W per channel (8 ohms, 20Hz-20kHz, 0.08% THD) |
| Audio Formats Supported | Dolby TrueHD, DTS-HD Master Audio |
| Network Connectivity | Ethernet, Wi-Fi |
| Streaming Services | Spotify Connect, Deezer, Tidal, Pandora, SiriusXM, TuneIn |
| Multi-Room Audio | Yes |
| THX Certified | Yes |
| Output Power | 110W per channel (8 ohms, 20Hz-20kHz, 0.08% THD) |
| Frequency Response | 5 Hz - 100 kHz (+1, -3 dB) |
| Input Sensitivity and Impedance | 200mV/47k ohms |
| Digital Inputs | 2 optical, 2 coaxial |
| Video Inputs | 6 HDMI, 3 component, 4 composite |
| Video Outputs | 2 x HDMI |
Read, retain, heed, and follow all safety and operating instructions.
Covers cleaning, water, accessories, cart safety, and ventilation.
Focuses on power sources, grounding, lightning, power lines, and overloading.
Guidelines for servicing and identifying damage requiring professional attention.
Legal restrictions on recording and details about the AC fuse.
Instructions for cleaning and ensuring correct power supply voltage.
FCC and Canadian compliance statements, and polarized plug caution.
Details on power, channels, technologies, and input/output capabilities.
Radio tuning features and IntelliVolume, Character Input.
Lists all accessories provided with the DTR-7.2 unit.
Step-by-step guide for inserting batteries into the remote.
Instructions on using the remote and optimal placement advice.
Diagram and explanation of front panel controls numbered 1-8.
Details on indicators and displays on the front panel.
Controls for power, standby, display info, and brightness.
Buttons for selecting input sources and navigating menus.
Buttons for exiting menus, managing presets, and selecting listening modes.
Buttons for direct audio mode and FM reception mode selection.
Buttons for audio modes, input selection, and speaker level adjustment.
Explanation of keys like Light, Mode Macro, Setup, and Volume.
Description of coaxial and optical digital audio input/output ports.
Warnings regarding secure connections, cable binding, and optical cap handling.
PRE OUT, Antenna, and Audio IN/OUT terminals.
Monitor Out, ZONE 2 OUT, and Component Video I/O terminals.
Information on connecting A-BUS keypads and IR control.
Mains outlets for connected devices and the unit's AC inlet.
Terminals for controlling external devices and inter-component communication.
IR IN/OUT, RS 232, and VIDEO IN/OUT ports.
Input for multi-channel audio sources like DVD-Audio.
Ground terminal for turntable connection to reduce hum.
General guidance for connecting audio components like turntables, CD players, and tape decks.
Specifics on connecting turntables and CD players, including digital options.
Guidelines for connecting cassette decks, MD/DAT recorders.
General guidance for connecting video sources like DVD players.
How to connect DVD players via composite, S-video, or component video.
Connecting video recorders and setting Video 2 input.
Connecting video cassette recorders and setting Video 1 input.
Connecting tuners, set-top boxes, and configuring Video 3/4 inputs.
Connecting monitors/projectors and video cameras.
Recommendations for ideal speaker setup and placement tips.
Basic speaker setup for surround sound playback.
Important points for placing front and surround speakers for optimal acoustics.
Step-by-step guide for stripping and connecting speaker cables.
How to connect a subwoofer using the PRE OUT SUBWOOFER jack.
Instructions for connecting supplied FM and AM antennas.
Steps to assemble and connect the AM loop antenna.
Considerations for installing an FM outdoor antenna for better reception.
Tips for installing AM outdoor antenna and using directional linkage.
Instructions for connecting to the amplifier for the remote zone listening.
Solutions for remote signal not reaching the unit's sensor.
Using IR emitter to control other devices remotely.
Steps for plugging in the power cord and turning the unit on.
Using remote for power-on and understanding memory preservation.
Guide to entering and navigating the setup menu using buttons.
Explanation of the basic setup menu and its limited options.
Explanation of the advanced setup menu and its comprehensive features.
Setting speaker impedance to match connected speakers' specifications.
Configuring the IR input terminal for remote sensor placement.
Setting connected speakers (subwoofer, front, center, surround) and their sizes.
Guidelines for selecting speaker sizes (Large/Small) for optimal sound.
Setting distances from speakers to the listening position for timing.
Menu for adjusting speaker volume levels for uniform sound.
Step-by-step guide for calibrating speaker levels using test tones.
Setting bass peak level to protect subwoofer from damage.
Setting digital input jacks and formats for each source.
Assigning digital input jacks (OPT/COAX) to input sources.
Selecting digital signal type priority (All, DTS, PCM).
Enabling multi-channel audio input for specific sources.
Setting video source display independently from audio.
Assigning component video inputs to specific sources.
Customizing names displayed for input sources and radio stations.
Adjusting volume levels automatically when switching sources.
Setting listening modes for different input source signal types.
Table showing compatible listening modes for various signal types.
Explains signal types like Analog/PCM, Dolby D, DTS, and D.F. formats.
Explains modes like Mono, Direct, Stereo, Theater-Dimensional, Dolby Pro Logic II.
Explains DTS, DTS-ES, THX, THX Cinema, and THX Surround EX modes.
Explains Mono Movie, Enhanced 7, Orchestra, Unplugged, Studio-Mix, TV Logic, All Ch Stereo.
Setting trigger outputs to control external devices via input source selection.
Adjusting bass and treble levels for front speakers and subwoofer.
Deciding which speakers output sound for surround back connections.
Turning sound effects like Re-EQ, Upsampling, Subwoofer, and Late Night on/off.
Adjusting timing for audio sync and soundfield effects.
Setting Low Frequency Effect levels for Dolby Digital and DTS.
Settings for Mono listening mode, including Academy filter and input channel.
Modifying Theater-Dimensional listening modes (angle, center, expander, level, dialog).
Adjusting surround modes for Dolby Digital, DTS, and Pro Logic II.
Selecting THX listening modes, including Re-EQ and Decoder settings.
Parameters for Mono Movie, Enhanced 7, Orchestra, etc. (Front Effect, Reverb).
Settings for volume display format and muting attenuation level.
Setting maximum volume limits and power-on volume.
Adjusting headphone volume to match speaker output level.
Customizing OSD menu appearance (background, mode, display position).
Steps to tune into FM or AM radio stations.
Achieving stereo reception and using FM mode settings.
Procedure to store, recall, and erase favorite radio stations.
Initial operation, muting, and bass/treble adjustments.
How to connect and use headphones with the unit.
How to switch between different audio listening modes during playback.
Customizing names displayed for input sources and radio stations.
Changing displayed information and setting the sleep timer.
Adjusting individual speaker levels and front display brightness.
Selecting audio modes (Auto, Multich, Analog) for input signals.
How to play back multichannel audio sources and use tone control.
Operating Zone 2 playback using the unit's front panel buttons.
Selecting input sources for Zone 2 using the remote controller.
Recording the currently selected source signal.
Recording a source signal different from the one being monitored.
Introduction to remote functions and recalling radio presets.
How to control an Onkyo cassette deck via the remote.
How to control an Integra/Onkyo CD player using the remote.
How to control an Integra/Onkyo DVD player using the remote.
How to control an Integra/Onkyo MD recorder using the remote.
Using mode buttons to control other devices, including learning codes.
Procedure for programming remote codes for other brands.
Specific codes for Integra/Onkyo DVD players with or without RI terminals.
Table listing pre-programming codes for various VCR, TV, DVD, SAT, and Cable brands.
Operating DVD, Satellite Tuner, and Cable TV units with the programmed remote.
Operating VCR and TV units with the programmed remote.
Step-by-step guide for programming remote commands into the RC-461M.
Steps for transferring commands and handling programming failures.
How to erase a command programmed to a single button.
How to erase all commands programmed to a specific MODE button.
Explanation of programming button sequences into a macro and how to program it.
How to execute a programmed macro function.
How to program a macro into the DIRECT MACRO button.
How to execute a programmed direct macro.
How to erase a macro programmed to the MODE MACRO button.
How to erase a macro programmed to the DIRECT MACRO button.
Procedure to reset the remote controller to factory defaults.
Template for recording programmed macro operations.
Technical specifications for the amplifier and tuner sections.
General specifications including power, dimensions, weight, and remote controller.
Solutions for power shutoff, no power, or no sound issues.
Solutions for center speaker, subwoofer, and humming noise issues.
Solutions for AM/FM reception problems and noise.
Solutions for no picture/sound and remote control problems.
Explanations for common on-screen messages and their solutions.
